The JUNG HYGHSPIN twin screw pumps are made of stainless steel.

The HYGHSPIN pump is suitable for use with free-flowing products of almost any consistency (whether aqueous, highly viscous, lumpy, fibrous or gaseous) and works with maximum efficiency. This particularly servicing-friendly twin screw pump with its outstandingly high suction performance gently handles all free-flowing products in volumes up to 300 m3 /h. No additional pump for CIP cleaning is required, which offers considerable time and cost savings thanks to lower investment and servicing costs.

APPLICATIONS

• Food manufacturing, e.g. dairy industry, delicatessen products, ketchups and sauces, confectionery and baby food
• Beverage manufacturing, e.g. fruit juices, syrups and concentrates, breweries
• Pharmaceutical industry
• Cosmetics industry, e.g. creams, pastes, lotions
• Chemical industry, e.g. adhesives, solvents, paints and varnishes, plastics And in many other industries where materials with a wide range of viscosities need to be transported.

TECHNICAL SPECIFICATIONS

• Capacity: 30 l/h–300 m³/h (100 l/h–350 m³/h*)
• Delivery pressure: Up to 35 bar
• Suction capacity: NPSHr up to 0.5 m Viscosity 0.5 – 1.000.000 cSt
• Product temperature: –10 to 130 °C, (higher temperatures on request)
• Cleaning temperature: Up to 140 °C
• Sterilisation temperature: Up to 145 °C
• Material for product-contact parts: 1.4404 with 3.1 certificate (other materials on request)
• Elastomers: HNBR and FDA-approved (other elastomers on request)

L'articolo Jung HYGHSPIN twin screw pumps proviene da FORTEK.

Designed to meet USDA (United States Department of Agriculture – Dairy Division) standards, these pumps are the ultimate in leak protection and clean pumping with the paired performance of AODD technology.  Whether in a clean-in-place or clean-out-of-place application, these pumps will exceed the need for reliability and cleanability.  Some of their most exceptional features include:

• Leak Detection
  Pair with Electronic Leak Detection for full USDA compliance.
• Materials Of Construction
  Electropolished 316 and 302/304 Stainless Steel components.
• Porting Options
  Rotatable manifolds, and top or bottom discharge available.

They are ideal for liquids with medium or high viscosity and a solid step up to 27.4 mm. All models have certified elastomers for food uses.

• Models available: from 1″ to 2″1/2
• Flow rates: from 204 l/min to 570 l/min

L'articolo SandPiper – USDA proviene da FORTEK.

The SandPiper FDA (Food & Drug Administration) pumps are available in 1″ through 3″ ball check valve designs and a 2″ (line size solids handling) flap check valve design. Variable flow capacities across the range are 0–235 gallons per minute.

These special duty pumps are constructed of FDA compliant material components of Stainless Steel (wetted castings) and a selection of FDA Santoprene, FDA Nitrile and PTFE diaphragms, check valves and valve seats. Standard non-wetted components are white epoxy coated Aluminum with stainless steel hardware. 1″, 1½” and 2″ pumps are offered with sanitary clamp fittings and 3″ pumps are offered with an ANSI flange.

• Materials Of Construction
  Electropolished 316 and 302/304 Stainless Steel components.
• Porting Options
  Rotatable manifolds, and top or bottom discharge available.

L'articolo SandPiper – FDA proviene da FORTEK.

FEATURES

• Lubrication free air distribution system
• Maintenance free ball check valve system
• Total visual inspection of the wetted parts

The design ensures a total visual inspection of the wetted parts. There are no hidden areas where bacteria can grove. The manifolds clamps and the housing screws are simply removed for complete disassembly and cleaning.

The DELLMECO sanitary pump  is also designed for cleaning and sterilization in place.

After such operations, the pump is easily turned in its support for drainage.

TECHNICAL SPECIFICATIONS

L'articolo DELLMECO H – Sanitary series proviene da FORTEK.

All SandPiper CD pumps are exclusively designed with containment chambers, hydraulically balanced/coupled pumping diaphragm and driver diaphragm assemblies. All containment chambers are designed to accommodate visual, mechanical and low voltage leak detection devices.

The SandPiper CD pumps are constructed of Aluminum, Cast Iron, Stainless Steel, Alloy C, Polypropylene and PVDF with TPE (thermal plastic elastomers), PTFE options in diaphragms and check valves.

L'articolo SandPiper – Containment Duty (CD) proviene da FORTEK.

The plastic pumps for high-pressures Dellmeco can reach pressures of 16 bar, thanks to a pressure multiplier.
The pump housings are available in polyethylene and Teflon at high molecular density; ATEX in the conductive configuration.
Flow rates range from 55 l/min to 565 l/min.

L'articolo Dellmeco – High pressures proviene da FORTEK.

All SandPiper Heavy Duty Flap pumps are configured with bottom discharge porting to prevent settling solids from shortening pump life and provide superior suction lift.

The SandPiper pumps HDF are made of aluminum, cast iron, stainless steel and therefore have a solid and compact design. Swing check valves and membranes are made of Neoprene, Santoprene, Buna, EPDM, Viton and Hytrel.

All the SandPiper pumps HDF , ATEX certified, have an anti-wear system and are available in models from 1″ to 4″ with maximum capacity of 984 l/m.

L'articolo SandPiper – HDF (Heavy Duty Flap) proviene da FORTEK.

The SandPiper pumps of the G series are equipped with everything needed for grounding, in order to prevent electrostatic discharge and are made using materials such as aluminum or stainless steel AISI 316, which make them also suitable for applications with corrosive fluids.

The SandPiper pumps of the G series are available in models from 1/2 “to 3” with maximum capacity of 889 l / m and a maximum bursting pressure of 34.5 bar.

L'articolo SandPiper – G proviene da FORTEK.

The HDB Metallic Pumps SandPiper, ATEX certified, provide high priming capacity and offer different configuration possibilities. They are all equipped with anti-wear system and realized through the use of materials which guarantee a compact and robust design. The membranes and the ball valves are manufactured in Neoprene, Buna; Viton or PTFE.

The HDB Metallic Pumps SandPiper are available in models from 1 “to 4” with maximum flow rate of 984 l / m.

L'articolo SandPiper – HDB (Heavy Duty Ball) proviene da FORTEK.

The submersible centrifugal pumps SandPiper SP / SMA are available in pneumatic versions:

• mod. SMA3-A, 3″ with capacities up to 1140 l/min, head up to mt. 20;
• mod. SPA 1″1/2-E with capacities up to 163 l/min, head up to mt. 7.6.

L'articolo SandPiper – SP / SMA proviene da FORTEK.