• Materials:

PP-GF (Polypropylene-Glass filled)

CFR-ETFE (Carbon Fiber filled – Ethylene tetrafluoroethylene)

• Close-coupled execution

PRODUCT CHARACTERISTICS

• Versatility: The STN offer a wide range of materials for the wetted parts:

PP-GF (Polypropylene-Glass filled)

CFR-ETFE (Carbon filled – Ethylene tetrafluoroethylene) – *only casing

• Reliability: Suitable for handling corrosive, aggressive and hazardous liquids (low viscosity, clean or slightly contaminated) in the chemical applications
• Design: Made with a reliable quality as the ETN but designed for smaller applications or where the working condition are less critical

TECHNICAL SPECIFICATIONS

• Performance 2900 rpm: Q max = 28 m3/h – H max = 25 mcl

• Electric Motors: 0.75 kW (motor size 80) -> 4 kW (motor size 112)

• Temperature Range:

PP-GF: 0°C -> +60°C

CFR-ETFE: -15°C -> +80°C

• Allowable Pressure Range:

PP: from 6 bar (20°C) to 4 bar (60°C)

CFR-ETFE: from 6 bar (20°C) to 4 bar (80°C)

• Threaded Connections:

STN 30 (G2” X G1”)
STN 40 (G2”¾ X G1”½)
*as option: Flanges ISO 1092 PN16RF or ANSI 150 RF

• Viscosity: 1 cSt min – 100 cSt max

• Allowable Solids:

Max concentration: 2% by weight
Max particle size: 0,10 mm

L'articolo STN – Plastic and fluoroplastic magnetic drive horizontal centrifugal pumps proviene da FORTEK.

• Sub-ISO designed
• Materials: AISI 316 (1.4408)
• Close-coupled execution

PRODUCT CHARACTERISTICS

• Versatility: With smaller plants come smaller hydraulic requirements, which lend themselves to sub-ISO sized pump units to offer optimum pump efficiency and longer MTBF (Mean time Between Failure)
• Reliability: Suitable for handling aggressive, toxic and hazardous liquids (low viscosity, clean or slightly contaminated) in the chemical, petrochemical and pharmaceutical industries, where the need of high safety standards is the first requirements
• Design: Modular Interchangeable configuration components with UTS series. Convenience for parts and maintenance, reduce parts needed in inventory stock

TECHNICAL SPECIFICATIONS

• Performances 2900 rpm :Q max = 24 m3/h – H max = 38 mcl
• Electric Motors: 0.75 kW (motor size 80) -> 7,5 kW (motor size 132)
• Temperature range: -30°C -> +140°C (as option -50°C -> +180°C)
• Allowable Pressure Range:

– ETS 30/40: 6 bar (20°C)
– ETS 50/70: 16 bar (20°C)

• Suction / Discharge: ETS 30: DN32/DN25; ETS 40: DN40/DN32; ETS 50: DN40/DN25; ETS 70: DN50/DN32
• Flange Connections:

– ETS 30/40 Flanged ISO 1092-1 PN 10RF
slotted ANSI 150 RF
– ETS 50/70 Flanged ISO 1092-1 PN 16RF
slotted ANSI 150 RF

• Viscosity: 1cSt min – 100cSt max
• Allowable Solids:

– Max concentration 2% by weight
– Max particle size 0,10 mm

L'articolo ETS – Metallic magnetic drive horizontal centrifugal pumps proviene da FORTEK.

• Materials : AISI 316 (1.4408)
• End-suction

The UTS / UTS-B pumps have long coupled (UTS) and/or close coupled (UTS-B) execution.

PRODUCT CHARACTERISTICS

• Versatility: Suitable for handling aggressive, toxic and hazardous liquids (low viscosity, clean or slightly contaminated) in the chemical, petrochemical and pharmaceutical industries, where the need of high safety standards is the first requirement.
• Reliability: The UTS are made by stainless steel AISI 316 : on bare shaft execution, the pump is also equipped as a standard with reliable oil lubricated bearing bracket, especially developed to be suitable even under heavy duty service.
• Design: UTS range shares the same hydraulic design with the UCS series (mechanical seal pumps) which have been developed focusing on Industry’s requests.

TECHNICAL SPECIFICATIONS

• Performances 2900 rpm: Q max = 80 m3/h – H max = 65 mcl
• Electric Motors:

UTS-B: 0.75 kW (motor size 80) -> 18.5 kW (motor size 160)
UTS: 0.75 kW (motor size 80) -> 18.5 kW (motor size 160)

• Temperature Range

UTS-B: -40°C* -> +180°C
UTS: -40°C* -> +300°C
* -100°C special execution

• Allowable Pressure Range:

UTS series 125/160: 16 bar (20°C)
UTS series 200: 16 bar (20°C)

• Flange Connections:

UNI 1092-1/ISO 7005-1 PN 16, type B
upon request, drilling slotted to match ANSI 150

• Viscosity: 1 cSt min – 100 cSt max
• Allowable Solids:

Max concentration: 2% by weight
Max particle size: 0,15 mm

L'articolo UTS / UTS-B – Metallic magnetic drive horizontal centrifugal pumps proviene da FORTEK.

The single mechanical seal CSS-35 has extremely abrasion-resistant SiC seats, no metal parts in contact with the processed liquid and a wide range of options allow the FC seals to be the best solution for every application.

TECHNICAL SPECIFICATIONS

• Mechanical seal design: Single Static Internal
• Process Side Materials: Carbon / SiC / RS-SiC
• Gasket Materials: FKM / EPDM / FFKM

L'articolo CSS-35 – Single mechanical seal proviene da FORTEK.

The double mechanical seal CDC-35 is the ideal choice when the pump is operating under cavitation or low flows. Standard equipped with pumping ring.

TECHNICAL SPECIFICATIONS

• Mechanical seal design: Double Back-to-Back Cartridge
• Process Side Materials: Carbon / SiC / RS-SiC
• Gasket Materials: FKM / EPDM / FFKM / FPM enc. FEP
• Mechanical Seal Materials – Environmental Side: Carbon/SiC
• Gasket Materials – Environmental Side: FKM / EPDM / FFKM / FMP enc FEP
• Suitable to PLAN: 52 / 53A / 54

L'articolo CDC-35 – Double mechanical seal proviene da FORTEK.

Lining:

The UCL/UCL-B pumps have long coupled (UCL) and/or close coupled (UCL-B) execution.

PRODUCT CHARACTERISTICS

• Versatility: Suitable for handling corrosive, aggressive and hazardous liquids (low viscosity, clean or slightly to dirty contaminated) in the chemical, petrochemical and pharmaceutical industries.
•  Reliability: The UCL offers a wide range of shaft sealing and the pumps are also equipped with reliable bearing bracket, especially developed to be suitable even under heavy duty service.
•  Design: UCL range shares the same hydraulic design with the UTN series (magnetic drive pumps) which have been developed focusing on chemical industry’s requests.

TECHNICAL SPECIFICATIONS

• Shaft seal type: Mechanical seal
• Design: EN 22858; ISO 2858
• Standard: ISO 5199
• Casing material: PFA Lined – PVDF Lined – PP Lined
• Casing partition: Radially split
• Type of casing: Volute Casing
• Impeller material: PFA Lined – PVDF Lined – PP Lined
• Type of impeller: Closed; Radial
• Nozzle position: End Suction
• Type of Execution:  Horizontal
• Type of Installation:

– UCL : Long-Coupled
– UCL-B : Close-Coupled

• Pull-out design:  UCL : Back pull-out
• Heatable:  No
• Type of connections: Flanged
• Flange Connections:

– UNI 1092-1/ISO 7005-1 PN 16, type B
– drilling slotted ANSI 150

• Suction characteristics: Non- priming
• Type of lubrication: Oil lubrication
• Drive frequency: 50 Hz / 60 Hz
• Type of drive: Electric motor
• Maximum rated pressure @20°C: PN 16
• Max. permissible fluid temperature

– PP: – 10°C -> +70°C
– PVDF: – 30°C -> +100°C
– PFA: – 50°C -> +140°C*

• Maximum head @ 2900 RPM 70m
• Maximum flow rate @ 2900 RPM: 110 m3/h
• Allowable Medium Viscosity Range: 1cSt – 200cSt
• Maximum drive rating

– UCL: 1,1 kW (size 80) -> 30 kW (size 200)
– UCL-B: 1,1 kW (size 80) -> 18.5 kW (size 160)

• Maximum speed of rotation (RPM): 3500
• Mechanical Seal CDR mechanical seals:
  – CSS-35 Single mechanical seal
  – CDC-35 Double cartridge mechanical seal
  Other mechanical seals can be adapted on UCL pumps, from single seal up to double back-to-back cartridge sealing system.

L'articolo UCL / UCL-B – Lined Process Horizontal Centrifugal pumps with Mechanical Seal proviene da FORTEK.

• Sub-ISO designed
• Lining: PP (Polypropylene), ETFE (Ethylene tetrafluoroethylene)
• Close-coupled execution

PRODUCT CHARACTERISTICS

• Versatility: The ETN offer a wide range of materials for the wetted parts:

PP (Polypropylene)

ETFE (Ethylene tetrafluoroethylene)

• Reliability: Suitable for handling corrosive, aggressive and hazardous liquids (low viscosity, clean or slightly contaminated) in the chemical applications
• Design: Made with a reliable quality as the UTN but designed for smaller applications (low duty)

TECHNICAL SPECIFICATIONS

• Performances 2900 rpm: Q max = 56 m3/h – H max = 35 mcl
• Electric Motors: 0.75 kW (motor size 80) -> 7,5 kW (motor size 132)
• Temperature Range:

PP: 0 °C -> + 65 °C
ETFE: – 15 °C -> + 95 °C

• Allowable Pressure Range:

PP: from 6 bar (20°C) to 4 bar (60°C)
ETFE: from 6 bar (20°C) to 4 bar (95°C)

• Suction / Discharge

ETN 50: DN40/DN 25
ETN 60: DN65/DN40
ETN 70: DN80/DN50

• Flange Connections:

UNI 1092-2/ISO 7005-2 PN 16
type B slotted to ASME/ANSI class 150

• Viscosity: 1 cSt min – 100 cSt max
• Allowable Solids:

Max concentration: 2% by weight
Max particle size: 0,10 mm

L'articolo ETN – Plastic and fluoroplastic lined magnetic drive horizontal centrifugal pumps proviene da FORTEK.