APPLICATIONS

With their technical characteristics and the variety of sleeves available, our pinch valves are suitable for many applications:

• Acids: hydrochloric, nitric, sulphuric, hydrofluoric, etc.
• Alkalis: sodium hydroxide, ammonia, potassium, phosphates, sodium bicarbonate, etc.
• Viscous or abrasive liquids: seawater, wastewater, limewash, paper pulp, paint, sludge, soot, clay slip, etc.
• Edible liquids: beer, wine, cocoa butter, edible oils, beet juice, milk, sugar, syrups, etc.
• Powdered products: cement, flour, sand, talc
• Other fluids: reagents for water treatment, organic solvents, fertilisers, etc.

ADVANTAGES

• Full-bore:

• No abnormal friction losses
• No risk of blockage
• Long sleeve service life:
  • Sleeves strengthened with fibre reinforcement enabling use in extreme conditions
• Easy to install (bolted flange or threaded socket connection, depending on model)
• Energy-efficient: low compressed air consumption
• Minimal (no mechanical wear), quick and easy maintenance: the sleeves are the only wear parts
• PVC pinch valves:

• Chemical resistance: suitable for corrosive atmospheres
• Light weight: low installation costs (no support)
• Totally leakproof with gases and powders as well as liquids, and even slurries

TECHNICAL SPECIFICATIONS

• 4 sizes available, from DN 20 to DN 40
• Material: PVC body, sockets and nuts
• Three sleeve grades available as standard (other materials on request)
• Operating pressure: 4 bar maximum
• Control pressure: 6 bar maximum
• Minimum differential pressure: approximately 2 bar, depending on sleeve grade
• Connections: threaded gas sockets
• Temperature range: -5°C to +60°C

L'articolo PVC pinch valves proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

B1 SERIES

• Maximum output: 26 l/h
• Maximum pressure: 10.3 bar
• Adjustable frequency: 1 to 100 spm
• Adjustable stroke length: 0 to 100%, recommanded minimum: 10%

C1 SERIES

• Maximum output: 76 l/h
• Maximum pressure: 20.7 bar
• Adjustable frequency: 1 to 100 spm
• Adjustable stroke length: 0 to 100%, recommanded minimum: 10%

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output

L'articolo Milton Roy – B1/C1 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

B7 SERIES

• Maximum output: 26 l/h
• Maximum pressure: 10.3 bar

C7 SERIES

• Maximum output: 76 l/h
• Maximum pressure: 20.7 bar

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output
• Adjustable frequency: 5 to 100 spm
• Adjustable stroke length: 0 to 100% Recommanded minimum: 10%
• Automatic stop by low level switch, optional detector
• Adjustable electronic power control

L'articolo Milton Roy – B7/C7 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

B9 SERIES

• Maximum output: 26 l/h
• Maximum pressure: 10.3 bar

C9 SERIES

• Maximum output: 76 l/h
• Maximum pressure: 20.7 bar

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output
• Adjustable stroke length: 0 to 100% Recommanded minimum: 10%
• Adjustable pressure capacity An LMI exclusive reducing pump noise, shock, vibration, and wear, prolonging pump life.
• Manual/External mode select The manual stroke rate is adjustable from 1 stroke per hour to 100 strokes per minute. Stroke length adjustment from 10 to 100%. On-Off external trigger control.
• Externally triggerable By voltage free switch, transistor, opto-coupler or hall effect sensor. – Divide incoming pulses from 1 to 999. – Multiply incoming pulses 1 to 999. – Batch accumulate to 999 strokes.
• 4-20 mA slope adjustable response Fully programmable stroke frequency vs. input signal: 0-100 strokes/min vs. 0-20 mA.
• In conjonction with LMI’s Digi-PulseTM Flow Monitor (FM-PRO-9), the pumps self-monitor output and provide an alarm signal in case of fault.

L'articolo Milton Roy – B9/C9 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

J5 SERIES

• Adjustable stroke frequency: 5 to 100 spm
• Adjustable stroke length: 0 to 100%
• Recommanded minimum: 20% for J55L – J56L 30% for J54L
• External proportional control: voltage free contact closure from water meter or pulse generator.

J series: Most environmentally-friendly
Maximum flow rate: 7.5 l/h
Maximum pressure: 9.7 bar
With a 12 V power supply, it can operate on batteries or via solar panel
Available in mode 5

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum output: 7.6 l/h
• Maximum pressure: 9.7 bar
• Maximum temperature of pumped chemical: 50 °C
• Self priming hight: 1.5 m
• Accuracy: ± 2% of adjusted output
• Supply: 12 V DC, 9 A maxi
• Average power: 19 Wh maxi

L'articolo Milton Roy – J5 proviene da FORTEK.

APPLICATIONS 

Oil and Gas
Extraction – Process: Injection of methanol at pressures of 500 bar and more in the extraction well
FPSO – Water treatment: Injection of sodium hypochlorite, biocides, scale inhibitor, oxygen reducing agent, etc.

Refineries – process: Pumping of hydrocarbons

Chemical and Petrochemical industries

Process: Dosing catalysts for polymerization of polyethylene

Process: Injection of supercritical CO2. Two possible solutions: metal liquid end with metal diaphragm or metal liquid end with PTFE diaphragm equipped with a system combining continuous degassing and diaphragm rupture detection (Milton Roy Europe patent)

AVAILABLE VERSIONS

• Packed plunger version
• Metal version with metal diaphragm
• 316L stainless steel or PVC version with single or double diaphragm (HPD)
• 316L stainless steel or PVC version with single or double diaphragm (HPD)

TECHNICAL SPECIFICATIONS

• Flow rate from 0 l/h to more than 70,000 l/h
• Pressure up to 1,000 bar
• Maximum temperature of pumped fluids: +110°C as standard/above +300°C on request
• Minimum temperature of pumped fluids: -30°C as standard/-60°C on request
• Pump with variable eccentric mechanism
• Micrometric adjustment while running or stopped, from 0 to 100% of nominal flow rate
• Accurate to within ± 1% – API 675 compliant
• Explosion-proof version conforming to ATEX CE EX II 2 G/D c T3 or T4, ATEX motor
• Diaphragm service life can be in excess of 20,000 hours, depending on the type of product pumped, and the service and installation conditions
• 6 sizes of mechanism: K, L, N, P, R and X series

L'articolo Milton Roy – PRIMEROYAL proviene da FORTEK.

They use the DSD technology has been developed to pump fluids at very low flow rates.

The efficiency of this technology is based on the properties of its diaphragm, which is unbreakable. That is why the DSD technology is now available with single diaphragm: the double diaphragm is no longer needed. This is a real game changer. Both configurations guarantee safe operation with the best efficiency, but the single DSD diaphragm option expends the higher hydraulic performance.

Launched in 2012 with the DSD 71, the DSD technology is now available with plungers de Ø3 and Ø4, for flow rates between 0.14 L/h and 10.08 L/h.

APPLICATIONS

Oil and Gas
Extraction: injection of corrosion inhibitor in the wellhead or in pipelines                                                                                Gas treatment: gas odorization, injection of mercaptan, or THT                                                                                       Refineries: injection of additives into fuel, injection of catalysts

Industry
Boiler water treatment: of make-up, circuit and discharge water (injection of corrosion inhibiter, biocides, anti-foaming agent, scale inhibitor, etc.)

Energy
Water treatment in utilities: Injection of corrosion inhibitor (phosphate), hydrazine, ammonia

Papermaking pulp coloring                                                                                                                                         Injection of dye ink

Our main customers
Aramco, Borouge, Qatargas, Sabic, Saudi Electricity, Saudi Polymers, Sonatrac

TECHNICAL SPECIFICATIONS

• Flowrates from 0.14 l/h to 345 l/h (100% – 50 Hz)
• Maximum pressure: 500 bar
• Maximum temperature of pumped fluids: +110 °C
• Available liquid ends version: DSD, Packed plunger version, Metal version with metal diaphragm, 316L stainless steel or PVC version with single or double diaphragm (HPD)
• Adjustment while running or stopped, from 0 to 100% of nominal flow rate
• Accurate to within ± 1% – API 675-compliant

L'articolo Milton Roy – MILROYAL D proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

P series: Most economical
Débit maximum : 12 l/h
Maximum flow rate: 12 l/h
Maximum pressure: 17.3 bar
Available in modes 0, 1 and 5

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum output: 12 l/h
• Maximum pressure: 17.3 bar
• Maximum temperature of pumped chemical: 50 °C
• Self priming hight: 1.5 m
• Accuracy: ± 2% of adjusted output

P0 series

• Fixed frequency: 60 or 100 spm
• Adjustable stroke length: 0 to 100%

P1 series

• Adjustable frequency: 1 to 60 or 100 spm
• Adjustable stroke length: 0 to 100%

L'articolo Milton Roy – P0/P1 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

P5 SERIES

All P5 Series dosing pumps offer the versatility of a selection for either automatic external trigger control or manual control (just plug in the external cable). In external trigger mode, they may connect with flowmeters with reed contact, or instrumentation with voltage free pulse output.

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

P series: Most economical
Débit maximum : 12 l/h
Maximum flow rate: 12 l/h
Maximum pressure: 17.3 bar
Available in modes 0, 1 and 5

TECHNICAL SPECIFICATIONS

• Electromagnetic dry diaphragm
•  Adjustable stroke frequency
•  Adjustable stroke length
• Maximum output: 12 l/h
• Maximum pressure: 17.3 bar

L'articolo Milton Roy – P5 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

AA9 SERIES

• Maximum output: 7.6 l/h
• Maximum pressure: 17.3 bar

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output
• Adjustable stroke length: 0 to 100% Recommanded minimum: 20% for AA94x – AA95x – AA96x 30% for AA97x
• Adjustable pressure capacity. An LMI exclusive reducing pump noise, shock, vibration, and wear, prolonging pump life.
• Manual/External mode select. The manual stroke rate is adjustable from 1 stroke/hour to 100 strokes/minute. Stroke length adjustment from 20 to 100%. On-Off external trigger control.
• Externally triggerable. By voltage free switch, transistor, opto-coupler or hall effect sensor. – Divide incoming pulses from 1 to 999. – Multiply incoming pulses 1 to 999. – Batch accumulate to 999 strokes.
• 4-20 mA slope adjustable response. Fully programmable stroke frequency vs. input signal: 0-100 spm vs. 0-20 mA.
• Flow monitoring and alarm programmable. In conjonction with LMI’s Digi-PulseTM Flow Monitor (FM-PRO-9), the pumps self-monitor output and provide an alarm signal in case of fault.

L'articolo Milton Roy – AA9 proviene da FORTEK.