• Solid-state electronics are unlikely to fail
• Metering is linear over the entire range
• Volume per stroke is constant and a known value
• Easy calibration of the desired feed rate
• Rate of change is virtually instaneous (0 to maximum rpm in 0.3 seconds) with AC motor

TECHNICAL SPECIFICATIONS

• Flow rates from 2 lph to 2600 lph.
• Pressures up to 173 bar.

L'articolo Hydra-Cell P – Metering pumps proviene da FORTEK.

In addition, Hydra-Cell can run dry indefinitely without damage to the pump.

The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.

The Hydra-Cell G15 pump is a versatile and reliable pump suitable for a wide range of applications.

The Hydra-Cell G15 pump can pump the full spectrum of low-to-high viscosity fluids.

FEATURES

• Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps.
• Simple, compact design reduces initial investment and lowers maintenance costs.
• Operational efficiencies reduce energy costs.
• Able to run dry without damage (or additional maintenance) to the pump in case of accident or operator error.
• Tolerates non-ideal operating conditions.
• Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace.

TECHNICAL SPECIFICATIONS

Maximum Flow Rate: 15.5 gpm (58.7 l/min)
Maximum Pressure: 2500 psi (172 bar) for Metallic Pump Heads

L'articolo Hydra-Cell – G15 proviene da FORTEK.

In addition, Hydra-Cell can run dry indefinitely without damage to the pump.

The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.

The Hydra-Cell G17 pump is a versatile and reliable pump suitable for a wide range of applications.

The Hydra-Cell G17 pump can pump the full spectrum of low-to-high viscosity fluids.

FEATURES

• Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps.
• Simple, compact design reduces initial investment and lowers maintenance costs.
• Operational efficiencies reduce energy costs.
• Able to run dry without damage (or additional maintenance) to the pump in case of accident or operator error.
• Tolerates non-ideal operating conditions.
• Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace.

TECHNICAL SPECIFICATIONS

• Maximum Flow Rate: 15.5 gpm (58.7 l/min)
• Maximum Pressure: 2500 psi (172 bar) for Metallic Pump Heads

L'articolo Hydra-Cell – G17 proviene da FORTEK.

In addition, Hydra-Cell can run dry indefinitely without damage to the pump.

The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.

The Hydra-Cell G20 pump is a versatile and reliable pump suitable for a wide range of applications.

The Hydra-Cell G20 pump can pump the full spectrum of low-to-high viscosity fluids.

TECHNICAL SPECIFICATIONS

• Maximum flow rate: 3.8 l / min at 1750 r / min.
• MAX discharge pressure: 103 bar.

L'articolo Hydra-Cell – G20 proviene da FORTEK.

In addition, Hydra-Cell can run dry indefinitely without damage to the pump.

The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.

The Hydra-Cell G35 pump is a versatile and reliable pump suitable for a wide range of applications.

The Hydra-Cell G35 pump can pump the full spectrum of low-to-high viscosity fluids.

FEATURES

• Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps.
• Simple, compact design reduces initial investment and lowers maintenance costs.
• Operational efficiencies reduce energy costs.
• Able to run dry without damage (or additional maintenance) to the pump in case of accident or operator error.
• Tolerates non-ideal operating conditions.
• Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace.

TECHNICAL SPECIFICATIONS

• Maximum Flow Rate: 36.5 gpm (138 l/min)
• Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads

L'articolo Hydra-Cell – G35 proviene da FORTEK.

In addition, Hydra-Cell can run dry indefinitely without damage to the pump.

The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.

The Hydra-Cell G04 pump is a versatile and reliable pump suitable for a wide range of applications.

The Hydra-Cell G04 pump can pump low and high viscosity fluids.

FEATURES

• Pumps the full spectrum of low-to-high viscosity fluids.
• Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps.
• Simple, compact design reduces initial investment and lowers maintenance costs.
• Operational efficiencies reduce energy costs.
• Able to run dry without damage (or additional maintenance) to the pump in case of accident or operator error.
• Tolerates non-ideal operating conditions.
• Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace.

TECHNICAL SPECIFICATIONS

Maximum Flow Rate: 2.9 gpm (11.2 l/min)
Maximum Pressure: 2500 psi (172 bar) for Metallic Pump Heads

L'articolo Hydra-Cell – G04 proviene da FORTEK.

In addition, Hydra-Cell can run dry indefinitely without damage to the pump.

The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.

The Hydra-Cell G10 pump is a versatile and reliable pump suitable for a wide range of applications.

The Hydra-Cell G10 pump can pump low and high viscosity fluids.

FEATURES

• Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps.
• Simple, compact design reduces initial investment and lowers maintenance costs.
• Operational efficiencies reduce energy costs.
• Able to run dry without damage (or additional maintenance) to the pump in case
• of accident or operator error.
• Tolerates non-ideal operating conditions.
• Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace.

TECHNICAL SPECIFICATIONS

• Maximum Flow Rate: 8.8 gpm (33.4 l/min)
• Maximum Pressure:

1500 psi (103 bar) for Metallic Pump Heads
350 psi (24 bar) for Non-metallic Pump Heads

L'articolo Hydra-Cell – G10 proviene da FORTEK.

In addition, Hydra-Cell can run dry indefinitely without damage to the pump.

The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.

The Hydra-Cell G25 pump is a versatile and reliable pump suitable for a wide range of applications.

The Hydra-Cell G25 pump can pump the full spectrum of low-to-high viscosity fluids.

FEATURES

• Features a seal-less design and horizontal disk check valves that enable the pump to handle abrasives and particulates that might damage or destroy other types of pumps.
• Simple, compact design reduces initial investment and lowers maintenance costs.
• Operational efficiencies reduce energy costs.
• Able to run dry without damage (or additional maintenance) to the pump in case
• of accident or operator error.
• Tolerates non-ideal operating conditions.
• Minimizes maintenance and downtime because there are no seals, packing or cups to leak or replace.

TECHNICAL SPECIFICATIONS

• Maximum Flow Rate: 20.0 gpm (75.9 l/min)
• Maximum Pressure:

1000 psi (69 bar) for Metallic Pump Heads
350 psi (24 bar) for Non-metallic Pump Heads

L'articolo Hydra-Cell – G25 proviene da FORTEK.

In addition, Hydra-Cell can run dry indefinitely without damage to the pump.

The multiple-diaphragm design of Hydra-Cell provides virtually pulse-less, linear flow without the need for expensive pulsation dampeners.

The Hydra-Cell G03 pump is a versatile and reliable pump suitable for a wide range of applications.

The Hydra-Cell G03 pump can pump low and high viscosity fluids.

FEATURES

• Connections: Threaded BSP (T), conical gas, 1/2 “and 3/8 IN” OUT.
• Maximum flow 11.3 l / min at 1750 r / min.
• MAX discharge pressure: 83 bar. MAX suction pressure: 17 bar.

L'articolo Hydra-Cell – G03 proviene da FORTEK.