Designed to meet USDA (United States Department of Agriculture – Dairy Division) standards, these pumps are the ultimate in leak protection and clean pumping with the paired performance of AODD technology.  Whether in a clean-in-place or clean-out-of-place application, these pumps will exceed the need for reliability and cleanability.  Some of their most exceptional features include:

• Leak Detection
  Pair with Electronic Leak Detection for full USDA compliance.
• Materials Of Construction
  Electropolished 316 and 302/304 Stainless Steel components.
• Porting Options
  Rotatable manifolds, and top or bottom discharge available.

They are ideal for liquids with medium or high viscosity and a solid step up to 27.4 mm. All models have certified elastomers for food uses.

• Models available: from 1″ to 2″1/2
• Flow rates: from 204 l/min to 570 l/min

L'articolo SandPiper – USDA proviene da FORTEK.

The SandPiper FDA (Food & Drug Administration) pumps are available in 1″ through 3″ ball check valve designs and a 2″ (line size solids handling) flap check valve design. Variable flow capacities across the range are 0–235 gallons per minute.

These special duty pumps are constructed of FDA compliant material components of Stainless Steel (wetted castings) and a selection of FDA Santoprene, FDA Nitrile and PTFE diaphragms, check valves and valve seats. Standard non-wetted components are white epoxy coated Aluminum with stainless steel hardware. 1″, 1½” and 2″ pumps are offered with sanitary clamp fittings and 3″ pumps are offered with an ANSI flange.

• Materials Of Construction
  Electropolished 316 and 302/304 Stainless Steel components.
• Porting Options
  Rotatable manifolds, and top or bottom discharge available.

L'articolo SandPiper – FDA proviene da FORTEK.

All SandPiper CD pumps are exclusively designed with containment chambers, hydraulically balanced/coupled pumping diaphragm and driver diaphragm assemblies. All containment chambers are designed to accommodate visual, mechanical and low voltage leak detection devices.

The SandPiper CD pumps are constructed of Aluminum, Cast Iron, Stainless Steel, Alloy C, Polypropylene and PVDF with TPE (thermal plastic elastomers), PTFE options in diaphragms and check valves.

L'articolo SandPiper – Containment Duty (CD) proviene da FORTEK.

The SandPiper pumps of the G series are equipped with everything needed for grounding, in order to prevent electrostatic discharge and are made using materials such as aluminum or stainless steel AISI 316, which make them also suitable for applications with corrosive fluids.

The SandPiper pumps of the G series are available in models from 1/2 “to 3” with maximum capacity of 889 l / m and a maximum bursting pressure of 34.5 bar.

L'articolo SandPiper – G proviene da FORTEK.

The HDB Metallic Pumps SandPiper, ATEX certified, provide high priming capacity and offer different configuration possibilities. They are all equipped with anti-wear system and realized through the use of materials which guarantee a compact and robust design. The membranes and the ball valves are manufactured in Neoprene, Buna; Viton or PTFE.

The HDB Metallic Pumps SandPiper are available in models from 1 “to 4” with maximum flow rate of 984 l / m.

L'articolo SandPiper – HDB (Heavy Duty Ball) proviene da FORTEK.

The submersible centrifugal pumps SandPiper SP / SMA are available in pneumatic versions:

• mod. SMA3-A, 3″ with capacities up to 1140 l/min, head up to mt. 20;
• mod. SPA 1″1/2-E with capacities up to 163 l/min, head up to mt. 7.6.

L'articolo SandPiper – SP / SMA proviene da FORTEK.

All SandPiper Heavy Duty Flap pumps are configured with bottom discharge porting to prevent settling solids from shortening pump life and provide superior suction lift.

The SandPiper pumps HDF are made of aluminum, cast iron, stainless steel and therefore have a solid and compact design. Swing check valves and membranes are made of Neoprene, Santoprene, Buna, EPDM, Viton and Hytrel.

All the SandPiper pumps HDF , ATEX certified, have an anti-wear system and are available in models from 1″ to 4″ with maximum capacity of 984 l/m.

L'articolo SandPiper – HDF (Heavy Duty Flap) proviene da FORTEK.

The certified pulsation dampeners / surge suppressors SandPiper are usable with any double membrane pneumatic pump and are helpful in maintaining an acceptable linear flow rate in addition to containing water hammer generated by pressure surges. They are positioned in line and as close as possible to the pump discharge. They work by means of a branch on the compressed air line, at the same pressure of the pump.

The certified pulsation dampeners / surge suppressors SandPiper are available in various versions, both in the choice of metallic materials, such as aluminum, cast iron and AISI plastics, such as polypropylene and PVDF, which in varying models from 1 “to 3”.

L'articolo SandPiper – Dampeners proviene da FORTEK.

The SandPiper – S pumps have a sturdy, compact design and are manufactured using Polypropylene, Acetal conductive and conductive polypropylene. Valves and membranes are made of Neoprene, Santoprene, Buna, Polyurethane, Viton or PTFE.

The SandPiper S pumps are available in models from 1/4″ to 3″ with maximum capacity of 901 l/m. Models up to 2″ are available with Atex certification.

L'articolo SandPiper – S proviene da FORTEK.

The polypropylene models are available from ½” to 2″ with capacity ranging from 521 l/min to 6051 l/min.

The PVDF models are available from ½ ” to 1″ with capacity ranging from 521 l/min to 2001 l/min.

The SandPiper – ATEX pumps also feature elastomers ranging from thermoplastic compounds to PTFE.

L'articolo SandPiper – ATEX proviene da FORTEK.