The mulstistage self-priming centrifugal pumps of the TBAK series are suitable for pumping clean and non-abrasive liquids and liquefied gases.

TECHNICAL SPECIFICATIONS

• Impeller: Radial and closed
• Max flow m³/h: 35
• Max pressure bar: 16
• Pumped fluids: Clean and non-abrasive liquids and liquefied gases
• Self-priming: Yes
• Stages nr.: 1-8
• Seal: Magnetical drive
• ISO: No

L'articolo TBAK – Magnetic drive mulstistage self-priming centrifugal pumps proviene da FORTEK.

The magnetic drive single stage centrifugal pumps with closed impeller of the TCK series are designed according to an innovative design and high quality components. They guarantee high performance and reduced power losses.

The magnetic drive single stage centrifugal pumps with closed impeller of the TCK series are designed so that there is no leakage of the fluid pumped to the atmosphere since they only have 2 static seals.

TECHNICAL SPECIFICATIONS

• Impeller: Closed
• Max flow m³/h: 300
• Max pressure bar: 16
• Pumped fluids: Clean and non-abrasive liquid
• Self-priming: No
• Stages nr.: 1
• Seal: Magnetic drive
• ISO: 2858
• No need for expensive control systems and minimal maintenance cost.
• Arrangement for control of magnetic coupling temperature and pump vibrations.
• Easy assembly due to the reduced number of components and to the modular design of the magnetic couplings.
• Internal lubrication with the pumped liquid.
• Possibility of retrofitting existing pumps equipped with traditional sealing systems (ie.: Double mechanical seal with flushing from a
  vessel or other accessories).
• Magnetic coupling in SmCo (Samarium – Cobalt).
• Internal bearing supports are sleeve with bearing in Silicon carbide.

APPLICATION FIELDS

• Chemical and petrolchemical processing industries, pharmaceutical and environmental industries, food industries and other services.
• Suitable for pumping of clean, not abrasive, corrosive, toxic, polluting liquids and with bad odors liquids hot or cold.

SPECIAL CONTRUCTIONS

• Monoblock mounting to B5 electric motor for best alignment and reduction of the overall dimensions.
• Cooling or heating of the Pump casing and of the Magnetic coupling.
• External bearing housing with oil lubricated ball bearings with possibility of cooling.

STANDARD MATERIALS OF CONSTRUCTION

• Pump casing: Ductile iron – AISI 316 Stainless steel – Hastelloy C
• Fly-wheel: UNI 5007-69 Cast iron
• Casing cover: Carbon steel – AISI 316 Stainless steel – Hastelloy C
• Primary shaft: AISI 420 Stainless steel
• Secondary shaft: AISI 420 Stainless steel – AISI 316 Stainless steel – Hastelloy C
• Impeller: UNI 5007-69 Cast iron – AISI 316 Stainless steel – Hastelloy C
• Ball bearing housing: UNI 5007-69 Cast iron
• Bearings housing: AISI 316 Stainless steel – Hastelloy C
• Inner magnetic rotor: AISI 316 Stainless steel – Hastelloy C
• Sealing can: AISI 316 Stainless steel – Hastelloy C
• Bearings: Silicon carbide

L'articolo TCK – Magnetic drive single stage centrifugal pumps with closed impeller proviene da FORTEK.

The magnetic drive multistage self-priming centrifugal pumps of the TBK series are designed according to an innovative design and high quality components. They guarantee high performance and reduced power losses.

The magnetic drive multistage self-priming centrifugal pumps of the TBK series have suction and priming capacity up to 8.5 m.c. of vacuum and allow to pump mixtures of liquids and gases.

TECHNICAL SPECIFICATIONS

• Impeller: Radial
• Max flow m³/h: 35
• Max pressure bar: 16
• Pumped fluids: Clean and non-abrasive liquids and liquefied gases
• Self-priming: Yes
• Stages nr.: 1-8
• Seal: Magnetic drive
• ISO: no
• Low operating speed for extended life, low vibration, low noise level and maximum reliability.
• No product leakage to atmosphere.
• No need for expensive control systems and minimal maintenance cost.
• Arrangement for control of magnetic coupling temperature and pump vibrations.
• Easy assembly due to the reduced number of components and to the modular design of the magnetic couplings.
• Internal lubrication with the pumped liquid.
• Magnetic coupling in SmCo (Samarium – Cobalt).
• Internal bearing supports are sleeve with bearing in Silicon Carbide.

APPLICATION FIELDS

• Chemical and petrolchemical processing industries, pharmaceutical industries, food industries and other services.
• Suitable for pumping of clean, not abrasive, corrosive, toxic, polluting liquids and with bad odors liquids hot or cold.
• Removal of condensates and distilled liquids.
• Solvents and liquefied gases applications.
• Removal of liquid from processes under vacuum.

SPECIAL  CONSTRUCTIONS

• Monoblock mounting to B5 electric motor for best alignment and reduction of the overall dimensions.
• Cooling or heating of the Magnetic coupling.
• External bearing housing with oil lubricated ball bearings with possibility of cooling.

STANDARD MATERIALS OF CONSTRUCTION

• Suction & discharge casings: UNI 5007-69 Cast iron or Ductile iron – AISI 316 Stainless steel
• Fly-wheel: UNI 5007-69 Cast iron
• Casing cover: Carbon steel – AISI 316 Stainless steel
• Suction & discharge port plates: UNI 5007-69 Cast iron – AISI 316 Stainless steel
• Primary shaft: AISI 420 Stainless steel
• Secondary shaft: AISI 420 Stainless steel – AISI 316 Stainless steel
• Impeller: Brass or Bronze – AISI 316 Stainless steel
• N.D.E. bearing: Graphite or Silicon carbide
• Bearing housing N.D.E.: UNI 5007-69 Cast iron – AISI 316 Stainless steel
• Inner bearings housing: AISI 316 Stainless steel
• Inner magnetic rotor: AISI 316 Stainless steel
• Sealing can: Hastelloy C or AISI 316 Stainless steel
• Bearings: Silicon carbide

L'articolo TBK – Magnetic drive multistage self-priming centrifugal pumps proviene da FORTEK.

• Sub-ISO designed
• Materials: AISI 316 (1.4408)
• Close-coupled execution

PRODUCT CHARACTERISTICS

• Versatility: With smaller plants come smaller hydraulic requirements, which lend themselves to sub-ISO sized pump units to offer optimum pump efficiency and longer MTBF (Mean time Between Failure)
• Reliability: Suitable for handling aggressive, toxic and hazardous liquids (low viscosity, clean or slightly contaminated) in the chemical, petrochemical and pharmaceutical industries, where the need of high safety standards is the first requirements
• Design: Modular Interchangeable configuration components with UTS series. Convenience for parts and maintenance, reduce parts needed in inventory stock

TECHNICAL SPECIFICATIONS

• Performances 2900 rpm :Q max = 24 m3/h – H max = 38 mcl
• Electric Motors: 0.75 kW (motor size 80) -> 7,5 kW (motor size 132)
• Temperature range: -30°C -> +140°C (as option -50°C -> +180°C)
• Allowable Pressure Range:

– ETS 30/40: 6 bar (20°C)
– ETS 50/70: 16 bar (20°C)

• Suction / Discharge: ETS 30: DN32/DN25; ETS 40: DN40/DN32; ETS 50: DN40/DN25; ETS 70: DN50/DN32
• Flange Connections:

– ETS 30/40 Flanged ISO 1092-1 PN 10RF
slotted ANSI 150 RF
– ETS 50/70 Flanged ISO 1092-1 PN 16RF
slotted ANSI 150 RF

• Viscosity: 1cSt min – 100cSt max
• Allowable Solids:

– Max concentration 2% by weight
– Max particle size 0,10 mm

L'articolo ETS – Metallic magnetic drive horizontal centrifugal pumps proviene da FORTEK.

• Materials : AISI 316 (1.4408)
• End-suction

The UTS / UTS-B pumps have long coupled (UTS) and/or close coupled (UTS-B) execution.

PRODUCT CHARACTERISTICS

• Versatility: Suitable for handling aggressive, toxic and hazardous liquids (low viscosity, clean or slightly contaminated) in the chemical, petrochemical and pharmaceutical industries, where the need of high safety standards is the first requirement.
• Reliability: The UTS are made by stainless steel AISI 316 : on bare shaft execution, the pump is also equipped as a standard with reliable oil lubricated bearing bracket, especially developed to be suitable even under heavy duty service.
• Design: UTS range shares the same hydraulic design with the UCS series (mechanical seal pumps) which have been developed focusing on Industry’s requests.

TECHNICAL SPECIFICATIONS

• Performances 2900 rpm: Q max = 80 m3/h – H max = 65 mcl
• Electric Motors:

UTS-B: 0.75 kW (motor size 80) -> 18.5 kW (motor size 160)
UTS: 0.75 kW (motor size 80) -> 18.5 kW (motor size 160)

• Temperature Range

UTS-B: -40°C* -> +180°C
UTS: -40°C* -> +300°C
* -100°C special execution

• Allowable Pressure Range:

UTS series 125/160: 16 bar (20°C)
UTS series 200: 16 bar (20°C)

• Flange Connections:

UNI 1092-1/ISO 7005-1 PN 16, type B
upon request, drilling slotted to match ANSI 150

• Viscosity: 1 cSt min – 100 cSt max
• Allowable Solids:

Max concentration: 2% by weight
Max particle size: 0,15 mm

L'articolo UTS / UTS-B – Metallic magnetic drive horizontal centrifugal pumps proviene da FORTEK.