The DL series electric pumps come with single-channel or Vortex impeller (DLV), and are designed to handle solids-laden wastewater, with up to 22 m head and 42 m3 /h delivery. 0,6 kW to 1,5 kW rated power. Solids handled up to 50 mm in diameter.

APPLICATIONS

• Pumping of sewage with suspended solids and filaments.
• Emptying of sumps, septic tanks and wastewater discharge tanks.
• Draining of flooded excavations and marshy ground.

SPECIFICATIONS

• Maximum liquid temperature:

50°C with fully submerged pump.

25°C with partially submerged pump.

• Mechanical seal Mechanical seal protected by sand labyrinth.
• Maximum dimension of suspended solids:

45 mm for DL80, DL90, DL105, DL80, DL90, DL105, MINIVORTEX, VORTEX.

50 mm for DL109, DL125, DL109, DL125, DLV100, DLV115.

• Motor in a dielectric non-toxic oil bath, which ensures the lubrification of the ball bearings and a more efficient cooling.
• Power cord: H07RN-F. – single-phase: with plug. – three-phase: without plug.
• Insulation class 155°C (F).
• IPX8 protection.
• Maximum immersion depth: 5 m.
• Versions:

– Single-phase: 220-240V, 50Hz 2 poles.

– Three-phase: 220-240V, 50Hz 2 poles. 380-415V, 50Hz 2 poles.

• The single-phase versions feature:

– capacitor housed in a box on the power cord + 1,5 m. power cord with plug.

– thermal overload protection thermal overload protection to stop pump supply in case of overheating.

CG versions (single-phase with pre-assembled float switch), 60 Hz single-phase and three-phase versions, versions with various power cord lengths and various plugs are available on request.

L'articolo DL – Submersible pumps with solids-laden wastewater proviene da FORTEK.

MAXIBOX PLUS are the ideal solution when clean water, rain water, gray water and waste water must be delivered to sewer mains located at a higher level, or where gravity drainage is not possible.

MARKET SECTORS: DOMESTIC, COMMERCIAL, INDUSTRIAL.

APPLICATIONS

• Suitable for delivering gray water and wastewater to main sewer lines located at a higher level, or where gravity drainage is not possible.

SPECIFICATIONS

• The standard tank is equipped with the following components, already assembled:

– polyethylene basin with a capacity of 1200 or 1900 litres.

– Threaded cover.

– 2 1/2” or 2” delivery pipes.

– 2 DN65 or DN50 sliding device systems.

– 2 ball check valves.

– 2 gate valves.

– Float switches bracket.

The supply includes also:

– Cable glands Cable glands for power supply cables and floats.

– 1 rubber seal 1 rubber seal for DN160 inlet connection.

• The standard tank doesn’t include the pumps, so it must be completed with:

– 2 submersible pumps DOMO, DOMO- GRI, DL, GLS 50/65, GLV 50/65. that have to be ordered separately.

– Sliding devices guideclaws.

• Selecting the right pump:

– The pumps with Vortex, Self-cleaning or Grinder impellers are suitable for clean water, effluent and sewage handling that contain suspended solids and fiber materials.

– The pumps with single or twin channel impellers are suitable for clean water, effluent and sewage handling that contain suspended solids but not fibres.

• Maxibox Plus must be installed buried outside the building according to the indications in the installation and operating instructions manual.
• Ecological solution:

– tank made of 100% recyclable polyethylene.

– watertight anti-pollution tank, according to the EN 12050-1 European standard.

• Easy maintenance and repair thanks to the sliding device systems.

ACCESSORIES

• Available accessories:

– Cover clamping system.

– Float switches.

– Control panels.

– Collar extension h 350 mm.

– Chains.

– Shackles.

– Seal kit for DN110 inlet connection

L'articolo MAXIBOX PLUS – Prefabricated tanks for lifting stations for wastewater handling proviene da FORTEK.

The GLS – GLV submersible pumps offer efficiency and reliability even under the toughest operating conditions, as well as wear resistance, shorter downtime and no risk of clogging.

MARKET SECTORS: RESIDENTIAL AND COMMERCIAL BUILDINGS, INDUSTRIES

APPLICATIONS

• Submersible pumps for pumping clean water, surface water and wastewater containing solids or long-fibred material.

SPECIFICATIONS

• Delivery: up to 244 m3 /h.
• Head: up to 41 m.
• Free passage: 48 mm (see hydraulic data table).
• Discharge connection: DN 50 – 65 – 80 – 100 mm.
• Motor power: up to 7,4 kW.
• Maximum liquid temperature: 40 °C.
• Maximum immersion depth: 20 m.
• pH pumped liquid: pH 5,5-14.
• Maximum liquid density: 1100 Kg/m3 .
• Motor with IP68 protection and class 155°C (F) or class 180°C (H) insulation.
• Power supply 230V single-phase, 400V three-phase, 50 Hz.
• Voltage variation:

– continuous running: max ±5%.

– intermittent running: max ±10%.

• Voltage imbalance between phases: max 2%.
• Maximum number of starts per hour: 30.

OPTIONAL FEATURES

• 20 m cable.
• Explosion proof version.
• Different voltages: 380V and 415V for three-phase version, 220V and 240V for single-phase version.

ACCESSORIES / INSTALLATION

• Lowering device.
• 90° delivery connection with hose connector.
• Threaded 90° delivery connection.
• Pump stand.
• Ball check valve.
• Wastewater level regulators.
• Command and control panels.
• Lifting chains.

L'articolo GLS, GLV – Submersible pumps for pumping clean and waste water proviene da FORTEK.

The GL – GLV submersible electric pumps for waste waters are designed to handle solids-laden wastewater, with up to 21 m head and 42 m³/h capacity.

Rated power: 1,1 kW (1,5 HP) to 1,5 kW (2 HP).

Solids handled up to 50 mm in diameter.

APPLICATIONS

• Circulation of sewage water containing suspended solids.
• Emptying of domestic waste water tanks, dirty water from cesspools and sewage water in general.
• Drainage of excavations and marshy grounds.

FEATURES

• Manufactured in cast iron – shaft and impeller in 304 stainless steel.
• Motor stator installed non-toxic, dielectric oil for the lubrication of the ball bearings and improved cooling.
• Volute pump casing. Mechanical seal protected by sand-proof labyrinth.
• Maximum depth of immersion: 5 meters.
• Maximum liquid temperature: 50°C with pump wholly submersed. 30°C with pump partially submersed.
• Motor class F – IP68 – 2900 rpm.
• Single-channel or vortex impeller – cross-section Ø 50 mm.
• Starting panel in the single-phase bersion.
• Versions:

– Single-phase 220-230 V 50 Hz.

– Three-phase 220-240 V, 50 Hz or 380-415 V 50 Hz.

SPECIFICATIONS

• Delivery: up to 40 m³/h
• Head: up to 20 m
• Power supply: both single and three-phase 50 Hz
• Power: from 1.10 kW up to 1.50 kW
• Temperature of pumped liquid: to 50 °C
• Maximum immersion depth: 5 m
• Free passage: up to 50 mm

L'articolo GL – GLV – Submersible electric pumps for waste waters proviene da FORTEK.

The DOMO GRI series electric pumps are equipped with an extremely efficient and highly reliable grinder system. The grinder is able to macerate all the solids present in the sewage and to pass it through small discharge pipes (25 mm diameter).

DOMO GRI is available in the 1,1 kW power.

APPLICATIONS

• Pumping of sewage with suspended solids.
• Emptying of septic tanks and residential sumps.
• Draining of flooded areas.
• Pumping water from a pressurized sewer network.

SPECIFICATIONS

• Maximum liquid temperature: 35°C with fully submerged pump.
• Dry motor.
• Power cord: H07RN-F – single-phase: with plug. – three-phase: without plug.
• Insulation class 155°C (F).
• IPX8 protection.
• Maximum immersion depth: 5 m.
• Versions:

– Single-phase: 220-240V, 50Hz 2 poles.

– Three-phase: 220-240V, 50Hz 2 poles. 380-415V, 50Hz 2 poles.

• Motor power: – 1,1 kW single-phase and three-phase.
• The single-phase versions feature:

– pre-assembled float switch pre-assembled float switch for automatic pump operation.

– built-in capacitor.

– thermal overload protection thermal overload protection to stop pump supply in case of overheating.

• DOMO GRI pumps feature:

– Rp 1“ threaded delivery port (female gas).

– technopolymer PBT Impeller.

– high resistance stainless steel grinder.

DRIVELUB SEAL SYSTEM:

Watertight electric motor protected by multiple seal system with oil chamber. A V-ring and silicon carbide mechanical seal mechanical seal (extremely resistant to wear and abrasion), as well as a lip seal lip seal which is continuosly lubricated by the DRIVELUB system, provide an extreme barrier against infiltration.

L'articolo DOMO GRI – Submersible Grinder Pumps proviene da FORTEK.

APPLICATIONS

• Pumping of effluent (VX model handles also suspended filaments).
• Emptying of septic tanks and residential sumps.
• Draining of flooded basements and garages.

SPECIFICATIONS

• Maximum liquid temperature: 35°C with fully submerged pump.
• Dry motor.
• Power cord: H07RN-F – single-phase: with plug. – three-phase: without plug.
• Insulation class 155°C (F).
• IPX8 protection.
• Maximum immersion depth: 5 m.
• Versions:

– Single-phase: 220-240V, 50Hz 2 poles.

– Three-phase: 220-240V, 50Hz 2 poles. 380-415V, 50Hz 2 poles.

• Motor power: – single-phase: 0,55 to 1,1 kW. – three-phase: 0,55 to 1,5 kW.The single-phase versions
• The single-phase versions feature:

– pre-assembled float switch for automatic pump operation.

– built-in capacitor.

– thermal overload protection thermal overload protection to stop pump supply in case of overheating.

• The DOMO 7 and DOMO 7VX models feature:

– Rp 1“1/2 threaded delivery port (female gas).

– handling of liquids with suspended solids up to 35 mm solids up to 35 mm in diameter.

– fiberglass-reinforced technopolymer impeller (DOMO S7 and DOMO S7VX models with stainless steel impeller are also available).

• The DOMO 10-15-20 DOMO 10-15-20 and DOMO 10-15-20 VX models feature:

– Rp 2“ threaded delivery port female gas (can be turned into a flanged version if an optional accessory is installed).

– handling of liquids with suspended solids up to 50 mm solids up to 50 mm in diameter.

– stainless steel twin-channel stainless steel twin-channel or vortex impeller.

DRIVELUB SEAL SYSTEM

Watertight electric motor protected by multiple seal system with oil chamber. A V-ring and silicon carbide mechanical seal mechanical seal (extremely resistant to wear and abrasion), as well as a lip seal lip seal which is continuosly lubricated by the DRIVELUB system, provide an extreme barrier against infiltration.

L'articolo DOMO – submersible electric pumps for drainage of dirty water proviene da FORTEK.

DOC pumps are versatile, corrosion-resistant and compact. Three basic versions are available with 0,25 to 0,55 kW power. A DOC 7VX version with Vortex impeller is available.

APPLICATIONS

• Emptying of residential sump pits, rainwater tanks or laundry drainage.
• Garden and lawn irrigation, with suction from rainwater tanks.
• Emergency draining of flooded basements and garages.
• Transfer of water from tanks and basins.

SPECIFICATIONS

• Maximum liquid temperature: 40°C.
• Dry motor Dry motor cooled by the pumped liquid.
• Power cord: – single-phase: with plug. – three-phase: without plug.
• Insulation class 130°C (B).
• IPX8 protection.
• Maximum immersion depth: 5 m.
• The DOC3 pump features a flow rate up to 135 l/min, head up to 7 m, and passes suspended solids up to 10 mm to 10 mm in diameter. Only available in single-phase version.
• The DOC7 pump features a flow rate up to 225 l/min, head up to 11 m, and passes suspended solids up to 10 mm to 10 mm in diameter.
• The DOC7VX pump features a flow rate up to 175 l/min, head up to 7 m, and can handle liquids with suspended solids up to 20 mm in diameter.
• Versions:

– Single-phase: 220-240V, 50Hz 2 poles.

– Three-phase: 220-240V, 50Hz 2 poles. 380-415V, 50Hz 2 poles.

• The single-phase versions feature:

– pre-assembled float switch pre-assembled float switch for automatic pump operation.

– built-in capacitor.

– thermal overload protection thermal overload protection to stop pump supply in case of overheating.

• SG versions (single-phase without float switch), GT versions (single-phase with pre-assembled tube float switch), 60 Hz single-phase and three-phase versions, versions with various power cord lengths and various plugs are available on request.
• A “shallow-suction device”, that can be mounted on both the DOC3 and DOC7 models, is available on request. It ensures the complete drainage of flooded floors (down to 3 mm from floor).

SOS KIT

The SOS Kit is available, for quick emergency dewatering of flooded basements, garages and residential buildings. The kit is composed of:

– a single-phase DOC3 electric pump, equipped with float switch, 10 meters power cord with plug and a quick coupling already mounted for rapid hose connection.

– 6 meters long flexible hose, complete with quick coupling already mounted for rapid pump connection.

– plastic box that can be used to store the kit on a shelf when not in use, or as a strainer during operation.

L'articolo DOC – Submersible pumps for dirty water proviene da FORTEK.

The DN pumps are drainage pumps with up to 22 metres head and up to 280 l/min (16,8 m3 /h) delivery. This range consists of three pumps with up to 0,75 kW rated power.

APPLICATIONS

• Draining of flooded excavations and marshy ground.
• Irrigation from rainwater resevoirs, ditches, ponds and watercourses.

SPECIFICATIONS

• Maximum liquid temperature: 50°C with fully submerged pump. 25°C with partially submerged pump.
• Open impeller with abrasion- resistant rubber coating.
• Mechanical seal protected by sand labyrinth.
• Maximum dimension of suspended solids: 5 mm.
• Motor in a dielectric non-toxic oil bath, which ensures the lubrification of the ball bearings and a more efficient cooling.
• Power cord: H07RN-F. – single-phase: with plug. – three-phase: without plug.
• Insulation class 155°C (F).
• IPX8 protection.
• Maximum immersion depth: 5 m.
• Versions:

– Single-phase: 220-240V, 50Hz 2 poles.

– Three-phase: 220-240V, 50Hz 2 poles. 380-415V, 50Hz 2 poles.

• The single-phase versions feature:

– capacitor housed in a box on the power cord + 1,5 m. power cord with plug.

– thermal overload protection thermal overload protection to stop pump supply in case of overheating.

CG versions (single-phase with pre-assembled float switch), 60 Hz single-phase and three-phase versions, versions with various power cord lengths and various plugs are available on request.

L'articolo DN – Drainage pumps for dirty water proviene da FORTEK.

The Flygt grinder pumps of the M series are non-clogging and built for tough challenges.

The Flygt grinder pumps of the M series handle capacities of up to 15 l/s (250 gpm) with motors from 1.5 to 10.9 kW (2 hp to 15 hP). These hardworking, heavy-duty grinders are ideal for handling your toughest waste liquids in residential and commercial applications.

Every Flygt grinder pump:

• Provides high efficiency
• Adjusts to actual system conditions without producing a very high pressure
• Reduces maintenance
• Comes backed by our expertise and support

CHARACTERISTICS

• Heavy duty grinders
• Superior shredding capability
• Robust and reliable
• Heavy duty cutting device

APPLICATIONS

• Pressure sewage system
• Wastewater transportation for a single home or small residential community
• Small lift stations
• Grinder pump installations
• Building wastewater sumps
• Manure pumping

L'articolo FLYGT centrifugal grinder pumps – M series proviene da FORTEK.

CHARACTERISTICS

• Robust: All components are made from robust materials for easy maintenance and long life.
• Powerful: Motor is specifically designed for reliable operation in submersible applications. It can run continuously without overheating.
• Durable: Heavy-duty bearings with long life.
• Environmentally friendly: Cooling system is designed to use the surrounding media to cool the pump; no use of environmentally hazardous fluids such as oils.
• Safe and straightforward: Cable entry prevents both cable strain and leakage.
• Smooth: The double mechanical seal provides extra reliability and protects against leakage.
• Flexible: Drilled pump housing, ready for any installation method.

L'articolo STEADY 1300 series – Submersible pumps proviene da FORTEK.