The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

B1 SERIES

• Maximum output: 26 l/h
• Maximum pressure: 10.3 bar
• Adjustable frequency: 1 to 100 spm
• Adjustable stroke length: 0 to 100%, recommanded minimum: 10%

C1 SERIES

• Maximum output: 76 l/h
• Maximum pressure: 20.7 bar
• Adjustable frequency: 1 to 100 spm
• Adjustable stroke length: 0 to 100%, recommanded minimum: 10%

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output

L'articolo Milton Roy – B1/C1 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

B7 SERIES

• Maximum output: 26 l/h
• Maximum pressure: 10.3 bar

C7 SERIES

• Maximum output: 76 l/h
• Maximum pressure: 20.7 bar

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output
• Adjustable frequency: 5 to 100 spm
• Adjustable stroke length: 0 to 100% Recommanded minimum: 10%
• Automatic stop by low level switch, optional detector
• Adjustable electronic power control

L'articolo Milton Roy – B7/C7 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

B9 SERIES

• Maximum output: 26 l/h
• Maximum pressure: 10.3 bar

C9 SERIES

• Maximum output: 76 l/h
• Maximum pressure: 20.7 bar

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output
• Adjustable stroke length: 0 to 100% Recommanded minimum: 10%
• Adjustable pressure capacity An LMI exclusive reducing pump noise, shock, vibration, and wear, prolonging pump life.
• Manual/External mode select The manual stroke rate is adjustable from 1 stroke per hour to 100 strokes per minute. Stroke length adjustment from 10 to 100%. On-Off external trigger control.
• Externally triggerable By voltage free switch, transistor, opto-coupler or hall effect sensor. – Divide incoming pulses from 1 to 999. – Multiply incoming pulses 1 to 999. – Batch accumulate to 999 strokes.
• 4-20 mA slope adjustable response Fully programmable stroke frequency vs. input signal: 0-100 strokes/min vs. 0-20 mA.
• In conjonction with LMI’s Digi-PulseTM Flow Monitor (FM-PRO-9), the pumps self-monitor output and provide an alarm signal in case of fault.

L'articolo Milton Roy – B9/C9 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

J5 SERIES

• Adjustable stroke frequency: 5 to 100 spm
• Adjustable stroke length: 0 to 100%
• Recommanded minimum: 20% for J55L – J56L 30% for J54L
• External proportional control: voltage free contact closure from water meter or pulse generator.

J series: Most environmentally-friendly
Maximum flow rate: 7.5 l/h
Maximum pressure: 9.7 bar
With a 12 V power supply, it can operate on batteries or via solar panel
Available in mode 5

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum output: 7.6 l/h
• Maximum pressure: 9.7 bar
• Maximum temperature of pumped chemical: 50 °C
• Self priming hight: 1.5 m
• Accuracy: ± 2% of adjusted output
• Supply: 12 V DC, 9 A maxi
• Average power: 19 Wh maxi

L'articolo Milton Roy – J5 proviene da FORTEK.

APPLICATIONS

• Industry: Filling process
• Water treatment: Proportional injection of chemicals. Control via voltage free contact of a pulse emitting water meter or any equipment generating electrical pulses
• pH regulation: Injection of sodium hydroxide and acids
• Boiler water treatment: Injection of disinfectant for domestic hot water treatment
• Agriculture: Insecticide spraying before storage of corn grains and seeds or directly in the silo
• Animal husbandry: Injection of medication, vitamins and vaccines into drinking water. Dosing of chlorine, acid (formic, propionic, fumaric, citric) into drinking water or mashing machines
• Biopharmaceutics: Preparation of saline solution

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum output: 12.1 l/h
• Maximum pressure: 17.3 bar
• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output

ADVANTAGES

• Economical
• Suitable for incorporation into a client system (OEM)
• Easy to install and use
• Fast commissioning – priming takes just a few seconds
• Fully compatible with most chemicals
• Dosing of products requiring automatic degassing (hydrogen peroxide, concentrated bleach, etc.) with AutoPrimeliquid ends
• Flow rate adjustable from 1 to 1,000 ensures that process requirements are accurately met
• Large pumping capacity due to double-ball valves
• External controls (depending on model): by pulse, by 4-20 mA signal, by low level detector, remote on/off, etc.
• Excellent vibration and shock resistance
• Indoor or outdoor use (IP65)

L'articolo Milton Roy – ROYTRONIC P+ proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

P series: Most economical
Débit maximum : 12 l/h
Maximum flow rate: 12 l/h
Maximum pressure: 17.3 bar
Available in modes 0, 1 and 5

TECHNICAL SPECIFICATIONS

• Mechanically actuated diaphragm electromagnetic pump
• Maximum output: 12 l/h
• Maximum pressure: 17.3 bar
• Maximum temperature of pumped chemical: 50 °C
• Self priming hight: 1.5 m
• Accuracy: ± 2% of adjusted output

P0 series

• Fixed frequency: 60 or 100 spm
• Adjustable stroke length: 0 to 100%

P1 series

• Adjustable frequency: 1 to 60 or 100 spm
• Adjustable stroke length: 0 to 100%

L'articolo Milton Roy – P0/P1 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

P5 SERIES

All P5 Series dosing pumps offer the versatility of a selection for either automatic external trigger control or manual control (just plug in the external cable). In external trigger mode, they may connect with flowmeters with reed contact, or instrumentation with voltage free pulse output.

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

P series: Most economical
Débit maximum : 12 l/h
Maximum flow rate: 12 l/h
Maximum pressure: 17.3 bar
Available in modes 0, 1 and 5

TECHNICAL SPECIFICATIONS

• Electromagnetic dry diaphragm
•  Adjustable stroke frequency
•  Adjustable stroke length
• Maximum output: 12 l/h
• Maximum pressure: 17.3 bar

L'articolo Milton Roy – P5 proviene da FORTEK.

The LMI range‘s electronically-controlled electromagnetic pumps are light and reliable. With more than 8,000 possible configurations, these pumps are covering various applications and processes.
LMI pumps are designed for use with the simplest as well as the most complex processes by means of their control interface, which uses a 4-20 mA signal or a physico-chemical controller. With their corrosion-resistant plastic housing and mechanical diaphragm liquid end, they form an accurate, rugged dosing solution that has been tried and tested over many years.

AA9 SERIES

• Maximum output: 7.6 l/h
• Maximum pressure: 17.3 bar

APPLICATIONS

• Municipal water treatment at wastewater treatment or potabilisation plants: Coagulation/flocculation (injection of ferric chloride, aluminium sulphate, WAC, etc.), slurry treatment (injection of polymers), pH regulation (injection of acids and alkalis), etc.
• Communal water treatment: Boiler water treatment (injection of disinfectant, film former, etc.), swimming pool water treatment (chlorine injection), rainwater marking (dye injection), chlorination (sodium hypochlorite injection), etc.
• Industrial water treatment: Boiler water treatment (injection of biocide, scale inhibitor, corrosion inhibitor, etc.), industrial waste treatment (injection of acids and alkalis, etc.), process water treatment (food process water treatment for CIP, etc.)
• Animal husbandry: treatment or post-weaning nursery (injection of drugs, vitamins in the drinking water)
• Spa/Steam rooms: Injection of aromatic essential oils, perfumes, etc.
• Other industries: Applications with low discharge pressures and precision dosing such as container filling

TECHNICAL SPECIFICATIONS

• Maximum temperature of pumped chemical: 50 °C
• Self priming height: 1.5 m
• Accuracy: ± 2% of adjusted output
• Adjustable stroke length: 0 to 100% Recommanded minimum: 20% for AA94x – AA95x – AA96x 30% for AA97x
• Adjustable pressure capacity. An LMI exclusive reducing pump noise, shock, vibration, and wear, prolonging pump life.
• Manual/External mode select. The manual stroke rate is adjustable from 1 stroke/hour to 100 strokes/minute. Stroke length adjustment from 20 to 100%. On-Off external trigger control.
• Externally triggerable. By voltage free switch, transistor, opto-coupler or hall effect sensor. – Divide incoming pulses from 1 to 999. – Multiply incoming pulses 1 to 999. – Batch accumulate to 999 strokes.
• 4-20 mA slope adjustable response. Fully programmable stroke frequency vs. input signal: 0-100 spm vs. 0-20 mA.
• Flow monitoring and alarm programmable. In conjonction with LMI’s Digi-PulseTM Flow Monitor (FM-PRO-9), the pumps self-monitor output and provide an alarm signal in case of fault.

L'articolo Milton Roy – AA9 proviene da FORTEK.