The rugged pump lower construction with Severe Duty rods and cylinders of the 2-Ball hydraulic piston pumps Viscount reduces downtime and extends the interval between repairs. The simple construction makes service and repair fast and easy. The efficient hydraulic power makes these pumps the ideal choice for factory and outdoor mobile use, even at below freezing temperatures. Models include Viscount I 1000 and 3000 and Viscount II 1000, 2000, 2600, 4500 and 5000.

PRODUCT FEATURES

• Clean, quiet operation with no airborne contamination
• Up to three times more energy efficient than comparable compressed air systems
• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Reduce routine maintenance and cut repairs time in half of comparable pump lowers
• Eliminate downtime without ice build-up

MODEL I 1000 

• Maximum Fluid Outlet Pressure: 1000 psi
• Maximum Hydraulic Input Pressure: 1000 psi
• Maximum Hydraulic Fluid Volume: 3 gpm
• Fluid Delivery Rate at 60 cycles/min: 3 gpm
• Maximum Hydraulic Fluid Temperature: 130°F
• Cycles per Gallon (3.8 Liter): 20
• Wetted Parts: 303 & 304 stainless steel, nitrile rubber, polyethylene
• Weight: 33 lb

MODEL I 3000 

• Maximum outlet pressure: 3000 psi (21 MPa, 207 bar)
• Fluid delivery rate: 5/8 gpm at 2500 psi
• Fluid outlet size: 3/8 npt(f)
• Fluid inlet size: 3/4 npt(m)
• Maximum recommended pump speed: 40 cycles/min.
• Hydraulic fluid consumption: 6.5 ounces per cycle; or one gallon per 19.5 cycles
• Hydraulic input pressure: 1000 psi maximum
• Hydraulic inlet: 3/4–16 UNF–2A, 37 flare(m)
• Hydraulic outlet size: 7/8–14 UNF–2A, 37 flare(m)
• Wetted parts: see manual 306981
• Weight: 37 lb

MODEL II Hydraulic Motor

• Maximum hydraulic fluid input pressure: Models 217022, 217338, 235345: 1500 psi
• Maximum hydraulic fluid input pressure: Model 262818: 1800 psi
• Maximum hydraulic fluid input pressure: Model 24W139: 1900 psi
• Maximum hydraulic fluid flow: 12 gpm
• Hydraulic fluid consumption: 1 gal per 5 cycles
• Effective piston area: 4.9 sq in
• Piston rod diameter: 2.5 in
• Stroke length: 4.69 in
• Thrust at 1500 psi (10 MPa, 103 bar): 7300 psi
• Weight: approximately 96 lb

MODEL II 4500 Pump

• Maximum hydraulic input pressure: 1500 psi
• Maximum pump output pressure: 4500 psi
• Maximum recommended pump speed: 50 cycles per minute – 3.3 gpm
• Hydraulic fluid consumption: 0.2 gal per cycle
• Wetted parts: See manual 307728

MATERIALS

• Waterborne
• Solventborne
• High Solids
• Xirallic
• CARC
• Metallics
• Topcoats
• Stains
• Varnishes

APPLICATIONS

• General Metal Finishing – Pumping

INDUSTRIES

• CARC
• Railroads
• Heavy Equipment Manufacturing

L'articolo Viscount – 2-Ball hydraulic piston pumps proviene da FORTEK.

The E-Flo DC (Dual Control) electric circulating pump has been found to be up to five times more efficient than similar sized pneumatic pumps. Watch this video to hear how our pump can reduce noise levels, plus it will help to lower your energy bill and save you money.

PRODUCT FEATURES

• Five times more efficient compared to similar sized pneumatic pumps
• Minimal pulsation at changeover provides a more consistent finish
• Integrated runaway protection protects your pump from premature wear and prevents costly material loss
• Basic model has two simple control knobs to easily adjust pump settings
• Advanced model lets you easily connect and manage multiple pumps with a single control module
• Quiet electric motor improves your work environment allowing you to remain near the pump for longer periods of time

Sealed 4-Ball Lowers

• No TSL required
• Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
• Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
• Compatible with existing Bulldog, NXT, President, Viscount, E-Flo, and E-Flo DC motors
• Open wet cup version is also available

TECHNICAL SPECIFICATIONS

• Maximum fluid working pressure

Models EC11xx and EC12xx: 300 psi

Models EC21xx and EC22xx: 200 psi

Models EC23xx and EC24xx: 400 psi

Models EC33xx and EC34xx: 300 psi

Models EC43xx and EC44xx: 220 psi

• Maximum potential fluid pressure

Models ECx1xx and ECx2xx: 218000/v (volume of lower in cc) = psi

Models ECx3xx and ECx4xx: 436000/v (volume of lower in cc) = psi

• Maximum continuous cycle rate: 20 cpm
• Maximum Flow: determined by the size of the pump lower. See Performance Charts, page 25.
• Input voltage

Models ECx1xx and ECx2xx: 100–250 Vac, single phase, 50/60 Hz
Models ECx3xx and ECx4xx: 200–250 Vac, single phase, 50/60 Hz

• Input current: 20 A maximum
• Power inlet port size: 3/4–14 npt(f)
• Ambient temperature range: 32–104°F
• Sound data: Less than 70 dB(A)
• Oil capacity: 1.5 quarts
• Oil specification: Graco Part No. 16W645 ISO 220 silicone-free synthetic gear oil
• Weight: Pump package (motor, 1000cc lower, stand, and tie rods): 220 lb
• Fluid inlet size: 1–1/2 npt(f)
• Fluid outlet size: 1 npt(f)
• Wetted parts: See Lower Pump manual

MATERIALS

• Solventborne
• High Solids
• Xirallic
• CARC
• Metallics
• Varnishes

APPLICATIONS

• Paint Circulation Pumps
• General Metal Finishing – Pumping
• Wood Finishing – Pumping
• Plastic Finishing – Pumping

INDUSTRIES

• Agriculture Equipment – Manufacturing
• Paint Kitchen
• Construction Equipment – Manufacturing
• CARC
• Furniture Finishing / Manufacturing
• General Metal Finishing / Manufacturing
• Wood Products Manufacturing
• Railroads
• Waste Management – Equipment Manufacturing
• Personal Recreation Vehicles
• RVs
• Wood and Wood Products – Pumps
• Heavy Equipment Manufacturing

L'articolo E-Flo DC – Electric circulating 4-ball piston pumps proviene da FORTEK.

PRODUCT FEATURES

• Positive displacement, 4-ball piston design provides high output per cycle to reduce pump wear and maintenance
• Modular design for easier maintenance
• Rugged body armor, won’t rust or dent
• De-icing controls eliminate stalling
• Optional DataTrak monitors and protects your pump
• Enclosed wet cup minimizes operator interaction for reduced maintenance

Sealed 4-Ball Lowers

• No TSL required
• Ultralife Series ceramic coating holds up to the harshest materials, including waterborne paints
• Completely sealed fluid section can be used almost anywhere, including catalyst and moisture sensitive materials
• Compatible with existing Bulldog, NXT, President, Viscount, E-Flo, and E-Flo DC motors
• Open wet cup version is also available

TECHNICAL SPECIFICATIONS

• Maximum Air Input Pressure: 100 psi
• Air Consumption: See performance charts in High-Flo 4–Ball Piston Pump manual.
• Maximum Fluid Temperature Rating: 150°F
• Wetted Parts: See 4–Ball Lower manual.
• Maximum Fluid Working Pressure

Model JX17XX 170 psi
Model JX20XX 200 psi
Model JX23XX 230 psi
Model JX30XX 300 psi
Model JX33XX 330 psi
Model JX35XX 350 psi
Model JX40XX 400 psi
Model JX44XX 440 psi
Model JX45XX 450 psi

• Fluid Flow at 60 cpm

Model JX17XX 63 gpm
Model JX20XX 31.5 gpm
Model JX23XX 47.3 gpm
Model JX30XX 23.2 gpm
Model JX33XX 63 gpm
Model JX35XX 31.5 gpm
Model JX40XX 16.9 gpm
Model JX44XX 47.3 gpm
Model JX45XX 23.2 gpm

• Output per Cycle

Model JX17XX 4000 cc
Model JX20XX 2000 cc
Model JX23XX 3000 cc
Model JX30XX 1500 cc
Model JX33XX 4000 cc
Model JX35XX 2000 cc
Model JX40XX 1000 cc
Model JX44XX 3000 cc
Model JX45XX 1500 cc

MATERIALS

• Waterborne
• Solventborne
• High Solids
• Xirallic
• CARC
• Metallics
• Topcoats
• Stains
• Varnishes

APPLICATIONS

• Paint Circulation Pumps
• General Metal Finishing – Pumping
• Wood Finishing – Pumping
• Plastic Finishing – Pumping

INDUSTRIES

• Agriculture Equipment – Manufacturing
• Paint Kitchen
• Construction Equipment – Manufacturing
• CARC
• Furniture Finishing / Manufacturing
• General Metal Finishing / Manufacturing
• Wood Products Manufacturing
• Railroads
• Waste Management – Equipment Manufacturing
• Personal Recreation Vehicles
• RVs
• Wood and Wood Products – Pumps
• Heavy Equipment Manufacturing

L'articolo High-Flo – Pneumatic 4-ball piston pumps with NXT technology proviene da FORTEK.

Merkur bellows piston pumps provide low maintenance with no seals exposed to the atmosphere. These pumps are designed to eliminate conventional throat seals, providing high reliability for moisture-sensitive materials.

The gentle pumping action of the Merkur bellows pump, combined with reduced sealing surfaces, provides superior handling of shear-sensitive materials, including UV coatings and waterborne materials.

PRODUCT FEATURES

• Highest technology air motor on the market
• Low air consumption for increased efficiency
• Simple air motor design and minimal parts reduces repair time
• Easy-to-flush design allows for fast color changes and reduced material waste
• 300 series stainless steel pump construction provides long-lasting durability
• Fewer parts and online replacement bellows seal means improved serviceability, lower cost of ownership and reduced downtime

Operator control panel 

Air controls located at operator height for easy setting and monitoring

DataTrak

• Easy-to-set runaway protection
• Pump diagnostics for maintenance
• Resettable batch counter tracks material usage and maintenance schedule

Merkur Air Motor Technology

• Highest technology air motor on the market
• Low air consumption for increased efficiency
• Simple air motor design and minimal parts reduces repair time

Leak Proof Pump Lower

• Easy-to-flush design allows for fast color changes and reduced material waste
• 300 series stainless steel pump construction provides long-lasting durability
• Fewer parts and online replacement bellows seal means improved serviceability, lower cost of ownership and reduced downtime

TECHNICAL SPECIFICATIONS

• Maximum fluid inlet pressure: 15 psi
• Maximum fluid temperature: 160°F
• Ambient temperature range: 35° to 120°F
• Stroke length: 2.5 in
• Wetted parts: PEEK, PTFE, stainless steel, tungsten carbide, UHMWPE
• Maximum Fluid Working Pressure

Models LB050A and LB050B: 4500 psi
Models LB100A and LB100B: 3600 psi
Models LB150A and LB150B: 2400 psi

MATERIALS

• Waterborne
• Solventborne
• High Solids
• Xirallic
• CARC
• Metallics
• Topcoats
• Stains
• Varnishes
• UV Coating

APPLICATIONS

• Catalyzed coatings
• Varnish and lacquer
• High solid coatings
• Abrasive materials
• Solvent and waterborne materials
• Moisture-sensitive materials
• UV-cure coatings
• Flat line machine lines
• General finishing applications where open wet cups are not preferred

INDUSTRIES

• CARC
• Furniture Finishing / Manufacturing
• General Metal Finishing / Manufacturing
• Railroads
• Wood and Wood Products – Pumps
• Heavy Equipment Manufacturing

L'articolo Merkur – Bellows piston pumps proviene da FORTEK.

The President 2-ball pumps are designed for reliability and long life. The positive displacement, 2-ball piston design provides uniform and easily controlled delivery.

Stainless steel or carbon steel models available to handle various fluids, including catalyzed materials.

NXT Air Motor Features

Built to handle the toughest finishing applications, the NXT air motor provides easy access to its integrated air controls and de-icing feature, plus it reduces noise.

Optional DataTrak Control

• Runaway protection
• Pump diagnostics
• Material usage

NXT Air Motor

• Modular design for easier maintenance
• Rugged body armor won’t rust or dent
• Highest technology air motor on the market
• Three exhaust styles available
  – Low noise
  – Remote
  – De-Icing

Modular Air Valve

• De-icing controls standard
• Up to 50% quieter than previous models
• Modular air valve
  – Reduces stalling
  – Easy-to-repair

Optional Integrated Air Controls

• Lockable easy-turn regulator
• Front-mounted for convenient access
• Compact and modular
• Built-in filtration

President/Monark: Typical Fluids Handled

• Solventborne and waterborne fluids
• High solids, plural component coatings
• Resins
• Stains, lacquers and varnishes
• Cleaning fluids
• Acid-catalyzed materials
• High solid coatings

TECHNICAL SPECIFICATIONS

• Maximum fluid working pressure

Models 221075, 223586, and 243664: 3600 psi (25 MPa, 248 bar)

Model 239327: 1500 psi (10.5 MPa, 105 bar)

• Maximum air input pressure

Models 221075, 223586, and 243664: 120 psi (0.8 MPa, 8 bar)

Model 239327: 100 psi (0.7 MPa, 7 bar)

• Ratio

Models 221075, 223586, and 243664: 30:1

Model 239327: 15:1

• Fluid flow at 60 cycles per minute

Models 221075, 223586, and 243664: 1 gallon (3.8 liters) per minute

Model 239327: 0.7 gallon (2.6 liters) per minute

• Recommended pump speed: 15 to 25 cycles per minute
• Weight

Model 221075: approximately 30 lb (14 kg)

Model 223586 and 243664: approximately 24 lb (11 kg)

Model 239327: approximately 18 lb (8 kg)

• Wetted parts: Carbon Steel; Chrome and Zinc Plating; Tungsten Carbide; PTFE; Leather; AISI 304, 316, 420, 440, and 17–4 PH Grades of Stainless Steel

Sound Pressure Levels (dBa) *measured at 1 meter unit (Input Air Pressures at 15 cycles per minute)

• Air Motor: 40 psi (0.28 MPa, 2.8 bar)
• President: 73.6 dB(A)
• Monark: 73.3 dB(A)

Sound Power Levels (dBa) *tested in accordance with ISO 9614–2 (Input Air Pressures at 15 cycles per minute)

• Air Motor: 40 psi (0.28 MPa, 2.8 bar)
• President: 87.4 dB(A)
• Monark: 87.0 dB(A)

APPLICATIONS

• General Metal Finishing – Pumping

INDUSTRIES

• Railroads
• Heavy Equipment Manufacturing

L'articolo President – Pneumatic 2-ball piston pumps proviene da FORTEK.

The air-operated double diaphragm pumps Triton represent an effective alternative to traditional pressure pots and standard diaphragm pumps.

Triton is an air-operated diaphragm spray package that applies a high quality, decorative finish to wood and metal parts. Triton is a more effective alternative to traditional pressure pots and standard diaphragm pumps.

PRODUCT FEATURES

• HIGH QUALITY FINISH. Low pulsation output and smooth pump changeover deliver a consistent spray pattern.
• EASY-TO-USE. Quick color changes and fast material refills save time and money.
• RUGGED CONSTRUCTION. Stainless steel or aluminum pump handles a wide variety of fluids.
• Double diaphragm pump designed specifically for finishing applications
• Low pulsation output provides smooth pump changeover
• Low shear design for minimal degradation of shear sensitive materials
• Rugged aluminum and stainless steel construction handles a wide variety of fluids

TECHNICAL SPECIFICATIONS

• Maximum fluid working pressure 115 psi
• Air pressure operating range 12 to 115 psi
• Ratio 1:1
• Maximum free flow delivery 8.5 gal/min
• Operating fluid temperature range 50 to 176°F
• Maximum suction lift 16 ft dry, 22 ft wet

Weight

• Part Nos. 233500, 233776: 9 lb
• Part Nos. 233501, 233777: 14 lb

Wetted Parts

• Part Nos. 233500, 233776: Aluminum, Stainless Steel, Acetal, Nylon, PTFE, fluoroelastomer
• Part Nos. 233501, 233777: Stainless Steel, Acetal, Nylon, PTFE, fluoroelastomer

Noise Level

• Sound pressure level at 40 psi (2.8 bar, 0.28 MPa) input air pressure: 69.1 dBA
• Sound pressure level at 60 psi (4.2 bar, 0.42 MPa) input air pressure: 72.1 dBA
• Sound power level at 40 psi (2.8 bar, 0.28 MPa) input air pressure: 80.8 dBA
• Sound power level at 60 psi (4.2 bar, 0.42 MPa) input air pressure: 83.7 dBA

MATERIALS

• Solventborne
• High Solids
• Xirallic
• CARC
• Metallics
• Stains
• Varnishes
• Fast-Set

APPLICATIONS

Applying primers, basecoats and topcoats for:

• General Metal Fabrication
• Farm and Construction
• Truck and Bus
• Automotive Components and Touch-up

Spraying stains, sealers, lacquers and topcoats for:

• Wood Furniture and Cabinetry
• Wood Windows and Doors
• Customized Wood

Using a wide range of technologies:

• Conventional
• HVLP
• Compliant
• Electrostatic Air Spray

INDUSTRIES

• Agriculture Equipment – Manufacturing
• Construction Equipment – Manufacturing
• CARC
• Furniture Finishing / Manufacturing
• General Metal Finishing / Manufacturing
• Wood Products Manufacturing
• Railroads
• Waste Management – Equipment Manufacturing
• Personal Recreation Vehicles
• RVs
• Wood and Wood Products – Pumps
• Heavy Equipment Manufacturing

L'articolo Triton 1:1 150 Series – Air-operated double diaphragm pumps proviene da FORTEK.

The high pressure diaphragm pump Endura-Flo 4D150 ensures long-lasting durability and can withstand runaway conditions better than other diaphragm pumps. This easy-to-install pump offers low pulsation output and smooth changeover for quick color changes, saving you time and money. Plus it has the highest pressure ratio in the industry at 4:1.

PRODUCT CHARACTERISTICS 

• 150 cc per cycle
• Redesigned diaphragm lasts longer and can hold up to extreme operating conditions better
• Easy access to critical components provides fast online maintenance
• Superior durability for abrasive materials
• Innovative design ensures easy access to critical components for fast, online repair
• Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems
• DataTrak option prevents runaway and tracks material usage
• Pumps are easily configurable for custom installations

TECHNICAL SPECIFICATIONS

• Maximum air input pressure: 100 psi
• Maximum fluid working pressure: 400 psi
• Maximum static fluid pressure: 430 psi
• Ratio: 4:1
• Maximum recommended continuous cycle rate: 20 cycles per minute
• Volume per cycle (double stroke): 5 oz per cycle
• Ambient and operating temperature range (use dry compressed air when operating at low temperatures): 32 to 122°F
• Dry suction lift: 23 ft
• Wet suction lift: 29 ft
• Air inlet size: 1/4 npt
• Fluid inlet size: 1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in bspp
• Fluid outlet size: 1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in. bspp
• Weight (approximate): 31 lb
• Wetted parts: stainless steel, perfluoroelastomer (FFKM), PTFE, Polyphenylene Sulfide (PPS)

Average Sound Pressure Levels in dBA at 20 cpm [measured at 1 meter (3.28 ft) horizontal, 1.5 meter (4.9 ft) above the equipment]

• At 70 psi (0.5 MPa, 5.0 bar): 62.3 dBA
• At 100 psi (0.7 MPa, 7.0 bar): 62.9 dBA

Sound Power measured per ISO 9614–2.

• At 70 psi (0.5 MPa, 5.0 bar): 70.8 dBA
• At 100 psi (0.7 MPa, 7.0 bar): 71.6 dBA

MATERIALS

• High Solids
• Xirallic
• CARC
• Metallics
• Stains
• Varnishes
• Fast-Set

APPLICATIONS

• General Metal Finishing – Pumping
• Wood Finishing – Pumping
• Plastic Finishing – Pumping

INDUSTRIES

• Agriculture Equipment – Manufacturing
• Construction Equipment – Manufacturing
• CARC
• Furniture Finishing / Manufacturing
• General Metal Finishing / Manufacturing
• Wood Products Manufacturing
• Railroads
• Waste Management – Equipment Manufacturing
• Personal Recreation Vehicles
• RVs
• Wood and Wood Products – Pumps
• Heavy Equipment Manufacturing

L'articolo Endura-Flo 4D150 – High pressure diaphragm pumps proviene da FORTEK.

The high pressure diaphragm pump Endura-Flo 4D350 ensures long-lasting durability and can withstand runaway conditions better than other diaphragm pumps. This easy-to-install pump offers low pulsation output and smooth changeover for quick color changes, saving you time and money.

PRODUCT CHARACTERISTICS 

• 350 cc per cycle
• Highest pressure ratio in the industry at 4:1
• Redesigned diaphragm lasts longer and can hold up to extreme operating conditions better
• Easy access to critical components provides fast online maintenance
• Superior durability for abrasive materials
• Innovative design ensures easy access to critical components for fast, online repair
• Minimal solvent to flush and consistent startup pressure make it perfect for multiple color change and piggable systems
• DataTrak option prevents runaway and tracks material usage
• Pumps are easily configurable for custom installations

TECHNICAL SPECIFICATIONS

• Maximum air input pressure: 100 psi
• Maximum fluid working pressure: 400 psi
• Maximum static fluid pressure: 430 psi
• Ratio: 4:1
• Maximum recommended continuous cycle rate: 20 cycles per minute
• Volume per cycle (double stroke): 5 oz per cycle
• Ambient and operating temperature range (use dry compressed air when operating at low temperatures): 32 to 122°F
• Dry suction lift: 23 ft
• Wet suction lift: 29 ft
• Air inlet size: 1/4 npt
• Fluid inlet size: 1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in bspp
• Fluid outlet size: 1 in. Tri-Clamp Flange, 1/2 in npt, or 1/2 in. bspp
• Weight (approximate): 31 lb
• Wetted parts: stainless steel, perfluoroelastomer (FFKM), PTFE, Polyphenylene Sulfide (PPS)

Average Sound Pressure Levels in dBA at 20 cpm [measured at 1 meter (3.28 ft) horizontal, 1.5 meter (4.9 ft) above the equipment]

• At 70 psi (0.5 MPa, 5.0 bar): 62.3 dBA
• At 100 psi (0.7 MPa, 7.0 bar): 62.9 dBA

Sound Power measured per ISO 9614–2.

• At 70 psi (0.5 MPa, 5.0 bar): 70.8 dBA
• At 100 psi (0.7 MPa, 7.0 bar): 71.6 dBA

MATERIALS

• High Solids
• Xirallic
• CARC
• Metallics
• Stains
• Varnishes
• Fast-Set

APPLICATIONS

• General Metal Finishing – Pumping
• Wood Finishing – Pumping
• Plastic Finishing – Pumping

INDUSTRIES

• Agriculture Equipment – Manufacturing
• Construction Equipment – Manufacturing
• CARC
• Furniture Finishing / Manufacturing
• General Metal Finishing / Manufacturing
• Wood Products Manufacturing
• Railroads
• Waste Management – Equipment Manufacturing
• Personal Recreation Vehicles
• RVs
• Wood and Wood Products – Pumps
• Heavy Equipment Manufacturing

L'articolo Endura-Flo 4D350 – High pressure diaphragm pumps proviene da FORTEK.

The Glutton’s bellows seal design pump is ideal for air assisted and airless spray applications. The unique divorced duplex plunger style pumps are designed to handle more shear and heat sensitive materials. Pump ratios include 4:1, 12:1 and 25:1.

Known for its robust design, the Glutton pump features a bellows seal that virtually eliminates the possibility of air or moisture contaminating the fluid.

PRODUCT FEATURES

• Bellows seal design provides low maintenance with no seals exposed to the atmosphere and eliminates conventional throat seals, providing high reliability for moisture-sensitive materials
• Reversible outlet manifold simplifies plumbing installations
• Vertical ball checks design ensures uniform ball wear and long life

APPLICATIONS

• Air spray and HVLP supply
• Circulating systems
• Catalyzed coatings
• Varnish and lacquer
• High solid coatings
• Abrasive materials
• Solventborne and waterborne fluids
• Moisture sensitive materials
• UV-cure coatings
• Flatline machine lines
• General finishing applications where open wet cups are not preferred

1. Vertical Ball Check. Reversible seats for uniform wear and long service life. External check allows for quick maintenance for materials that pack or mat out easily
2. External Air Valve. Easy installation and maintenance
3. Outlet Manifold. Simplifies plumbing and installation
4. Pump Stand. Included for easy mounting
5. Cylinder and Displacement Rod. Designed to handle a broad range of coatings
6. Piston Seal. Multiple configurations for material compatibility
7. Heavy-Duty Bellows Seal (Optional). Designed for longer life in abrasive applications
8. Carbide Seat Accessory. Ideal for abrasive materials

TECHNICAL SPECIFICATIONS

Glutton 400 Plunger Pumps

• Maximum Fluid Working Pressure: 400 psi
• Maximum Air Input Pressure: 100 psi
• Air Operating Range: 25–100 psi
• Maximum Continuous Pump Speed: 60 cpm
• Fluid Flow at 60 cpm: 5.6 gpm
• Fluid Volume per Cycle: 0.096 gal
• Maximum Suction Lift (water): 15 ft
• Maximum Operating Temperature: 150°F
• Air Inlet: 1/2 npt(f)
• Fluid Inlet: 1.25 npt(f)
• Fluid Outlet: 1 npt(f)
• Weight: 80.5 lb
• Wetted Parts:

Model 220663 and 237008: Carbon steel, stainless steel, polypropylene, ultra high molecular weight polyethylene (220663 only), nylon (237008 only), PTFE

Model 220666 and 237011: 304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, ultra high molecular weight polyethylene (220666 only), nylon (237011 only) , PTFE

Glutton 1200 Plunger Pumps

• Maximum Fluid Working Pressure: 1200 psi
• Maximum Air Input Pressure: 100 psi
• Air Operating Range: 25–100 psi
• Maximum Continuous Pump Speed: 60 cpm
• Fluid Flow at 60 cpm: 2 gpm
• Fluid Volume per Cycle: 0.034 gal
• Maximum Suction Lift (water): 15 ft
• Maximum Operating Temperature: 150°F
• Air Inlet: 1/2 npt(f)
• Fluid Inlet: 1.25 npt(f)
• Fluid Outlet: 1 npt(f)
• Weight: 78 lb
• Wetted Parts

Model 220664 and 237009: Carbon steel, stainless steel, polypropylene, ultra high molecular weight polyethylene (220664 only), nylon (237009 only), PTFE,

Model 220667 and 237012: 304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, ultra high molecular weight polyethylene (220667 only), nylon (237012 only), PTFE

Glutton 2500 Plunger Pumps

• Maximum Fluid Working Pressure: 2500 psi
• Maximum Air Input Pressure: 100 psi
• Air Operating Range: 25–100 psi
• Maximum Continuous Pump Speed: 60 cpm
• Fluid Flow at 60 cpm: 0.9 gpm
• Fluid Volume per Cycle: 0.015 gal
• Maximum Suction Lift (water): 6 ft
• Maximum Operating Temperature: 150°F
• Air Inlet: 1/2 npt(f)
• Fluid Inlet: 1.25 npt(f)
• Fluid Outlet: 3/4 npt(f)
• Weight: 61 lb
• Wetted Parts

Model 220665 and 237010: Carbon steel, stainless steel, polypropylene, PTFE, ultra high molecular weight polyethylene (220665 only), nylon (237010 only)

Model 220668 and 237013:
304 and 316 stainless steel, 17–4 PH stainless steel, polypropylene, PTFE, ultra high molecular weight polyethylene (220668 only), nylon (237013 only)

MATERIALS

• Waterborne
• Solventborne
• High Solids
• Xirallic
• CARC
• Metallics
• Stains
• Varnishes
• UV Coating

L'articolo Glutton – Bellows Pumps proviene da FORTEK.

Designed for high production applications, Monark pumps provide uniform and easily controlled delivery with its reliable Monark air motor.

PRODUCT FEATURES

• Drum and stubby length models available for mounting and application flexibility
• Positive displacement, 2-ball piston design provides uniform and easily controlled delivery
• Stainless steel or carbon steel models available to handle various fluids
• Fluid return stanchion for circulation back to the pump
• Ultra High Molecular Weight Polyethylene (UHMWPE) packings for extended pump life in abrasive fluids

NXT Air Motor Features

Built to handle the toughest finishing applications, the NXT air motor provides easy access to its integrated air controls and de-icing feature, plus it reduces noise.

Optional DataTrak Control

• Runaway protection
• Pump diagnostics
• Material usage

NXT Air Motor

• Modular design for easier maintenance
• Rugged body armor won’t rust or dent
• Highest technology air motor on the market
• Three exhaust styles available
  – Low noise
  – Remote
  – De-Icing

Modular Air Valve

• De-icing controls standard
• Up to 50% quieter than previous models
• Modular air valve
  – Reduces stalling
  – Easy-to-repair

Optional Integrated Air Controls

• Lockable easy-turn regulator
• Front-mounted for convenient access
• Compact and modular
• Built-in filtration

President/Monark: Typical Fluids Handled

• Solventborne and waterborne fluids
• High solids, plural component coatings
• Resins
• Stains, lacquers and varnishes
• Cleaning fluids
• Acid-catalyzed materials
• High solid coatings

TECHNICAL SPECIFICATIONS

• Maximum fluid working pressure

Models 221075, 223586, and 243664: 3600 psi (25 MPa, 248 bar)

Model 239327: 1500 psi (10.5 MPa, 105 bar)

• Maximum air input pressure

Models 221075, 223586, and 243664: 120 psi (0.8 MPa, 8 bar)

Model 239327: 100 psi (0.7 MPa, 7 bar)

• Ratio

Models 221075, 223586, and 243664: 30:1

Model 239327: 15:1

• Fluid flow at 60 cycles per minute

Models 221075, 223586, and 243664: 1 gallon (3.8 liters) per minute

Model 239327: 0.7 gallon (2.6 liters) per minute

• Recommended pump speed: 15 to 25 cycles per minute
• Weight

Model 221075: approximately 30 lb (14 kg)

Model 223586 and 243664: approximately 24 lb (11 kg)

Model 239327: approximately 18 lb (8 kg)

• Wetted parts: Carbon Steel; Chrome and Zinc Plating; Tungsten Carbide; PTFE; Leather; AISI 304, 316, 420, 440, and 17–4 PH Grades of Stainless Steel

Sound Pressure Levels (dBa) *measured at 1 meter unit (Input Air Pressures at 15 cycles per minute)

• Air Motor: 40 psi (0.28 MPa, 2.8 bar)
• President: 73.6 dB(A)
• Monark: 73.3 dB(A)

Sound Power Levels (dBa) *tested in accordance with ISO 9614–2 (Input Air Pressures at 15 cycles per minute)

• Air Motor: 40 psi (0.28 MPa, 2.8 bar)
• President: 87.4 dB(A)
• Monark: 87.0 dB(A)

APPLICATIONS

• General Metal Finishing – Pumping
• Wood Finishing – Industrial

INDUSTRIES

• CARC
• Railroads
• Wood and Wood Products – Pumps
• Heavy Equipment Manufacturing

L'articolo Monark – Pneumatic 2-Ball Piston Pumps proviene da FORTEK.