Internal gear pumps – FORTEK https://fortek.marcoperez.consulting/en/ Fornitura, Prodotti e Servizi per l'industria Mon, 02 May 2022 09:43:55 +0000 en-US hourly 1 https://fortek.marcoperez.consulting/wp-content/uploads/2021/10/cropped-logo-fortek-32x32.png Internal gear pumps – FORTEK https://fortek.marcoperez.consulting/en/ 32 32 VIKING Universal seal pumps https://fortek.marcoperez.consulting/en/prodotto/viking-universal-seal-pumps/ Thu, 27 Jan 2022 21:09:30 +0000 https://fortek.marcoperez.consulting/?post_type=product&p=5829 The Universal Seal pumps VIKING are designed for a broad range of applications requiring continuous duty at pressures up to 200 psi. Even higher pressures are possible with high fluid viscosities at reduced operating speeds (consult factory). This Series features 16 different sizes with flows to 1,600 GPM (364 m3 /h), with four materials of construction […]

L'articolo VIKING Universal seal pumps proviene da FORTEK.

]]> The Universal Seal pumps VIKING are designed for a broad range of applications requiring continuous duty at pressures up to 200 psi. Even higher pressures are possible with high fluid viscosities at reduced operating speeds (consult factory). This Series features 16 different sizes with flows to 1,600 GPM (364 m3 /h), with four materials of construction options.

The Universal Seal pumps VIKING are applied to both thin and thick liquids, and operate equally well in either direction. They are also capable of operating under suction lift conditions. This series has the broadest range of sealing options of all pumps built by Viking. The stuffing box on all sizes accepts packing, numerous component single mechanical seals, or a wide variety of cartridge seals. The Universal Seal series is Viking Pump’s most versatile series of internal gear pumps due to the availability of many design and material options. A summary of the major design features and available options appears to the right.

MODELS

  • 124A, 4124A, 124AE, 4124AE, 224A, 4224A, 224AE, 4224AE, 324A, and 4324A (Cast Iron)
  • 126A, 4126A, 226A and 4226A (Ductile Iron)
  • 123A, 4123A, 223A and 4223A, 323A, 4323A (Steel Externals)
  • 127A, 4127A, 227A and 4227A, 327A, 4327A (Stainless Steel)

SPECIFICATIONS

  • Capacity to 1,600 GPM (363 m3 /h)
  • Viscosity 28 to 2,000,000 SSU (1 to 440,000 cSt)
  • Pressure to 200 PSI (14 BAR)
  • Temperature -120°F to +800°F (-85°C to +430°C)

 

L'articolo VIKING Universal seal pumps proviene da FORTEK.

]]> VIKING heavy duty alloy pumps https://fortek.marcoperez.consulting/en/prodotto/viking-heavy-duty-alloy-pumps/ Thu, 27 Jan 2022 21:09:30 +0000 https://fortek.marcoperez.consulting/?post_type=product&p=5830 The 724 and 4724 Series Heavy-Duty line of 316 Stainless Steel pumps feature the foot type bracket with rotor thrust control. All wetted parts are 316 Stainless Steel. The three smaller pumps include opposite port casings, others are right angle port construction. All have revolvable casings for handy port selection and choice of either packing […]

L'articolo VIKING heavy duty alloy pumps proviene da FORTEK.

]]> The 724 and 4724 Series Heavy-Duty line of 316 Stainless Steel pumps feature the foot type bracket with rotor thrust control. All wetted parts are 316 Stainless Steel. The three smaller pumps include opposite port casings, others are right angle port construction. All have revolvable casings for handy port selection and choice of either packing or mechanical seal. The small pumps are especially useful in pilot plant service, small metering applications, accurate chemical additive processing, pumping of pharmaceuticals in small capacities and for feed and product pumps on evaporators and distillation systems. The six larger sizes meet the needs of moving corrosive liquids when greater capacities are needed in chemical and other processing plants.

In placing orders for 724 and 4724 Series pumps, please furnish the following information:

1. Liquid pumped

2. Viscosity of liquid

3. Specific Gravity

4. Temperature of Liquid

5. Capacity of Pump

6. Suction lift or head

7. Discharge Pressure

SPECIFICATIONS

  • Max. Capacity: 110 GPM (25 M³/hr)
  • Max. Pressure: 200 PSI (14 BAR)
  • Max. Viscosity: 2,000,000 SSU (440,000 cSt)
  • Temperature Range: -110°F to +500°F (-80°C to +260°C)
  • Sealing / Coupling: Packing, Component Mechanical Seal in Stuffing Box (sizes F-G), Component Mechanical Seal Behind-the-Rotor (sizes H-LL)
  • Porting: Opposite (180°) NPT/BSP Ports (sizes F-G), Right Angle (90°) NPT/BSP Ports (sizes H-L), Right Angle (90°) 150 Class ANSI Flange Ports (sizes LQ & LL)
  • Mounting: Foot Mount

FEATURES

  • Jacketed bracket standard on H-LL sizes for heating or cooling. Optional jacketed heads available.
  • Integral thrust bearing standard for heavy duty applications.
  • Integral pressure relief valve standard on sizes G-LL.
  • Motor speed operation on smaller sizes – no reducer required.
  • Alloy wetted materials with cast iron non-wetted bracket for enhanced value.

L'articolo VIKING heavy duty alloy pumps proviene da FORTEK.

]]> VIKING Abrasive liquid – Internal gear pumps https://fortek.marcoperez.consulting/en/prodotto/viking-abrasive-liquid-internal-gear-pumps/ Thu, 27 Jan 2022 21:09:30 +0000 https://fortek.marcoperez.consulting/?post_type=product&p=5831 The Abrasive Liquid Series heavy duty internal gear pumps utilize hard parts in key wear areas, combined with unique designs and operating practices to reduce abrasive wear for longest life. The Abrasive Liquid Series heavy duty internal gear pumps are ideally suited for liquids with concentrations of small but hard particles, such as paints, inks and pigments; […]

L'articolo VIKING Abrasive liquid – Internal gear pumps proviene da FORTEK.

]]> The Abrasive Liquid Series heavy duty internal gear pumps utilize hard parts in key wear areas, combined with unique designs and operating practices to reduce abrasive wear for longest life.

The Abrasive Liquid Series heavy duty internal gear pumps are ideally suited for liquids with concentrations of small but hard particles, such as paints, inks and pigments; filled polyols and resins; and waste oils. Improvements

The 4624B series pumps replaces the old style 4625 series, offering the advantage of a one-piece bearing housing for faster and easier end clearance adjustment, and adding the LS and QS sizes. The F & FH4624B pumps are identical to the old F & FH4625 pumps. Jacketing is available by ordering a 4224B model with abrasive fitting (tungsten carbide idler pin and bushing, abrasive liquid seal with flush line).

SPECIFICATIONS

  • Max. Capacity: 182 GPM (36 M³/hr)
  • Max. Pressure: 150 PSI (10 BAR)
  • Max. Viscosity: 250,000 SSU (55,000 cSt)
  • Temperature Range: -40°F to +300°F (-40°C to +150°C)
  • Sealing / Coupling: Component Mechanical Seals
  • Porting: Opposite (180°), Right Angle (90°), NPT/BSP, Flanged

FEATURES

  • Extended service life provided by:
    • Tungsten carbide components in critical wear areas of pump.
    • Other hardened component options available.
    • Silicon carbide mechanical seal faces.
    • Positive seal flush to keep fresh supply of liquid at seal faces.
    • Behind the rotor seal placement eliminates abrasive wear on shaft bushing.
  • Pin drive mechanical seal increases viscosity range.
  • For abrasive liquids like paints, inks and waste oil.

VIKING Abrasive liquid - Internal gear pumps - Features

L'articolo VIKING Abrasive liquid – Internal gear pumps proviene da FORTEK.

]]> Asphalt Jacketed 34 series – Internal gear pumps https://fortek.marcoperez.consulting/en/prodotto/asphalt-jacketed-34-series-internal-gear-pumps/ Thu, 27 Jan 2022 21:09:30 +0000 https://fortek.marcoperez.consulting/?post_type=product&p=5827 have a wide range of building materials, as well as a variety of and are therefore a suitable solution for manyin any environmentensure high reliability with high temperatures, robust designthe outer bearing

L'articolo Asphalt Jacketed 34 series – Internal gear pumps proviene da FORTEK.

]]>

The VIKING internal gear pumps of the Asphalt Jacketed 34 series configuration possibilities, pumping problems .

The VIKING internal gear pumps of the Asphalt Jacketed 34 series even in tough applications high pressures and thanks to the and crankshaft .

BENEFITS

  • Pumps designed specifically for asphalt applications
  • Variety of problem-solving sealing options
  • Quick time to temperature
  • Variety of jacketing or electric heat options
SPECIFICATIONS
  • Max. Capacity: 20 to 450 GPM (4.5 to 102 M³/hr)
  • Max. Pressure: 100 PSI (7 BAR)
  • Max. Viscosity: 250,000 SSU (55,000 cSt)
  • Temperature Range: -60°F to +450°F (-50°C to +230°C)
  • Sealing / Coupling: Packing
  • Porting: Right Angle (90°), Flanged
  • Mounting: Foot Mount
  • FEATURES
    • Simplified rotor retention system, economical for medium duty applications.
    • Jacketing suitable for hot oil or steam for enhanced application flexibility.
    • Belt drive or reducer drive options available.

L'articolo Asphalt Jacketed 34 series – Internal gear pumps proviene da FORTEK.

]]> VIKING Motor speed – Internal gear pumps https://fortek.marcoperez.consulting/en/prodotto/viking-motor-speed-internal-gear-pumps/ Thu, 27 Jan 2022 21:09:30 +0000 https://fortek.marcoperez.consulting/?post_type=product&p=5828 The VIKING internal gear pump of the Motor Speed Series has been designed to allow the direct coupling of the pump to the 4/6 poles electric motors. The reliability of performance at high speeds is made possible by a shaft bearing system with two ball bearings. The low installation costs are guaranteed by the absence of helical gearboxes. […]

L'articolo VIKING Motor speed – Internal gear pumps proviene da FORTEK.

]]> The VIKING internal gear pump of the Motor Speed Series has been designed to allow the direct coupling of the pump to the 4/6 poles electric motors. The reliability of performance at high speeds is made possible by a shaft bearing system with two ball bearings. The low installation costs are guaranteed by the absence of helical gearboxes. The available materials are cast iron, carbon steel and stainless steel. It is possible to arrange the jacket on the head to control the temperature of the pumped product, the by-pass valve.

SPECIFICATIONS

  • Max. Capacity: 580 GPM (132 M³/hr)
  • Max. Pressure: 250 PSI (17 BAR)
  • Max. Viscosity: 25,000 SSU (5,500 cSt)
  • Temperature Range: -40°F to +350°F (-40°C to +180°C)
  • Sealing / Coupling: Component Mechanical Seal
  • Porting: Opposite (180°), NPT, Flanged (ANSI or DIN)
  • Mounting: Foot Mount, Motor Mount (Close-Coupled), Vertical or Horizontal Inline Mount

APPLICATIONS

  • Refined fuels
  • Oils
  • Chemicals

FEATURES

  • Heavy duty antifriction bearing shaft support for higher pressure and extended pump life.
  • Motor speed operation eliminates speed reduction equipment on thinner liquids.
  • Pressure lubrication system automatically lubricates the idler bushing, increasing pump life.
  • Space-saving mounting configurations available to better match your installation needs:
    • Foot Mount
    • Motor Mount (Close-Coupled NEMA and IEC)
    • Vertical Inline Mount

L'articolo VIKING Motor speed – Internal gear pumps proviene da FORTEK.

]]> VIKING Universal Mag Drive series – Internal gear pumps https://fortek.marcoperez.consulting/en/prodotto/viking-universal-mag-drive-series-internal-gear-pumps/ Thu, 27 Jan 2022 21:09:29 +0000 https://fortek.marcoperez.consulting/?post_type=product&p=5826 The internal gear pumps of the Universal Mag Drive series can reduce maintenance and environmental costs by eliminating the pump shaft seal saving you more than 50% of the total pump, parts and downtime cost in one year. The internal gear pumps of the Universal Mag Drive series are available in cast iron, carbon steel and […]

L'articolo VIKING Universal Mag Drive series – Internal gear pumps proviene da FORTEK.

]]> The internal gear pumps of the Universal Mag Drive series can reduce maintenance and environmental costs by eliminating the pump shaft seal saving you more than 50% of the total pump, parts and downtime cost in one year.

The internal gear pumps of the Universal Mag Drive series are available in cast iron, carbon steel and stainless steel. They are designed for transfering hazardous liquids, difficult to contain or at high temperature (caustic solutions, isocyanates, solvents and mercaptans).

The internal gear pumps of the Universal Mag Drive series ensure high reliability and greater flexibility in tough applications and have a wide range of flow rates.

In addition, the standard version allows to control the temperature of the pumped product and the by-pass valve, which instead is completely jacketed in the special version.

PERFORMANCE

  • No packing or mechanical seals means no seal failure or replacement
  • Easily handles both high and low viscosity fluids
  • Reduce material loss, contamination and general housekeeping
  • Simple design, easy to maintain
  • Proven reliability, 20+ years of experience

AVAILABLE OPTIONS

  • Multiple port sizes, types and ratings available, including threaded, raised, and flat-face flanged
  • Jacketing options available for critical areas of pumps, including the casing, head and relief valve
  • Materials of construction: steel, stainless steel, and cast iron
  • Special construction options for bushings, shafts, pins and clearances available
  • Protective device options include: power load monitor, temperature monitor, and low flow detector
  • Other options include: casing and canister drains and gauge ports

APPLICATIONS

  • Hard-to-Seal Liquids
  • Hazardous & Reactive Liquids
  • 24/7 Operations

L'articolo VIKING Universal Mag Drive series – Internal gear pumps proviene da FORTEK.

]]>