When paired with any of Graco’s priming piston pumps, the Viscount II hydraulic air motor offers exceptional cost savings by operating on 20% of the energy used by a pneumatic motor. The Viscount II, Graco’s patented hydraulic motor, replaces the King, Bulldog or Senator motors with the 800 or 2100 pump.

Product features

• Clean, quiet and efficient hydraulic power
• Extremely durable hydraulic pump with long-life packing design
• Highly efficient Viscount hydraulic motor reduces energy costs
• Stainless steel wetted parts with neoprene packings

Hydraulic or Pneumatic?

Graco offers both hydraulic and pneumatic motors to drive your priming piston pump. Both are top quality choices for smooth,
continuous ink delivery.

• Pneumatic Motors. Graco’s King®, Bulldog®, Senator® and President® pneumatic motors provide rugged, reliable service life for ink
  manufacturing and printing applications.
• Hydraulic Motors. When paired with any of Graco’s priming piston pumps, the Viscount® II hydraulic motor offers exceptional cost savings by operating on 20% of the energy used by pneumatic motors.

TECHNICAL SPECIFICATIONS

Viscount II 1200

• Lower size: 2100
• Maximum fluid pressure: 82.8 bar
• Maximum motor inlet pressure: 51.7 bar (5.1 Mpa-750 psi) (oil)
• Flow rate @ 60 cpm: 28.4 l/min (7.5 gpm)
• Cfm or gpm required per gallon: 6 l/min (1.6 gpm)
• Fluid pump outlet size: 1-1/2″ npt (m)
• Motor inlet size: 3/4″ npt (f)
• Weight of pump: 89 kg (196 lb)
• Instruction manual: 308149

Viscount II 3100

• Lower size: 800
• Maximum fluid pressure:  213 bar (21.3 MPa-3100 psi)
• Maximum motor inlet pressure: 51.7 bar (5.1 MPa-750 psi (oil))
• Flow rate @ 60 cpm: 10.6 l/min (2.8 gpm)
• Cfm or gpm required per gallon: 16.2 l/min (4.3 gpm)
• Fluid pump outlet size: 1″ npt (f)
• Motor inlet size: 3/4″ npt (f)
• Weight of pump: 80 kg (177 lb)
• Instruction manual: 308351

MATERIALS

• Inks and Colorants

INDUSTRIES

• Letterpress and lithographic ink manufacturing
• Flexographic and gravure ink manufacturing
• Magazine and commercial printers
• Newspaper printers

APPLICATIONS

• Supplying ink to press fountains
• Supplying raw ink
• Evacuating to dispersion tanks
• Supplying ink to milling equipment
• Supplying ink to batch dispensing systems
• Waste water treatment
• Pumping solvents for ink wash systems

L'articolo Viscount II 1200 and 3100 – Hydraulic piston pumps proviene da FORTEK.

Mini Fire-Ball 225 is an air-operated grease and oil pump, perfect for medium pressure and low volume applications.

You can’t afford down time, especially when your shop is small and your work force depends on equipment performance.

The Mini Fire-Ball 225 is an air-operated grease and oil pump has an engineered design with fewer moving parts, which means less wear out, and reduced downtime and more profit for your business.

It is available in 3:1 for oil and 50:1 for grease.

Mini Fire-Ball 225 – Product features

• 50:1 ratio allows grease to be pumped up to NLGI #2
• Available for 35 lb (16 kg), 120 lb (55 kg) and 400 lb (180 kg) containers
• 3:1 ratio for petroleum and synthetic-based oils
• Double acting pump provides continous flow operation
• Rugged inlet cage withstands demanding shop environments
• Full line of stationary and portable package configurations

Fire-Ball series

• Durable. Thick cast aluminum air motor housing offers unmatched durability.
• Reduce Downtime. Displacement rods have minimal wear due to a proprietary Graco manufacturing process.
• Fewer Repairs. Fewer moving parts in the air motor assembly means less downtime and low repair cost.
• Superior Sealing. Non-metallic poppet valves offer positive sealing performance, even with contaminated “dirty” air environments for long life without repair.
• Reduced Icing. Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.
• Extended Seal Life. In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.
• Corrosion-Resistant. Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

TECHNICAL SPECIFICATIONS

• Maximum Fluid Working Pressure: 58 MPa/580 bar
• Maximum Air Inlet Pressure: 1.0 MPa/10 bar
• Ratio: 50:1
• Pump Cycles: 130/.45 kg
• Maximum recommended pump speed: 100 cycles/min
• Recommended pump speed for continuous operation: 60 cycles/min
• Maximum Delivery: .25 kg/min at 60 cycles/min
• Stroke Length: 50.8 mm
• Maximum Pump Operating Temperature: 54 °C
• Air Inlet Size: 3/8 npt (f)
• Fluid Outlet Size: 1/4 npt (f)
• Wetted Parts: Carbon steel; zinc plating; brass; polyurethane; ultra-high molecular weight polyethylene; Buna-N
• Sound Pressure Level (measured 1 meter from unit): 77.8 db(A) @ 140 psi, 100 cpm
• Sound Power Level (tested in accordance with ISO 9614–2): 85.6 dB(A) @ 140 psi, 100 cpm
• Approximate Weight: 6.8 kg

INDUSTRIES

• Agriculture Equipment – Maintenance
• Mining Equipment – Maintenance
• Forestry Equipment
• Paper Mills
• Dealerships and Quick Lubes – Pumps

MATERIALS

• Motor Oil
• Gear Oil
• Hydraulic Fluid
• Automatic Transmission Fluid
• Oil
• Grease

APPLICATIONS

• Lubrication
• Oil Transfer
• Grease Transfer
• Pumping
• Fluid Transfer

L'articolo Mini Fire-Ball 225 – Air-operated grease and oil pump proviene da FORTEK.

Fire-Ball 300 pumps are air-powered pumps and packages for oil or grease. They are perfect for high pressure oil or grease dispense and transfer.

Graco pumps are built to last. With so many innovative maintenance-saving features, Graco pumps reduce downtime and save you money. No matter what fluid you’re pumping Graco has a quality solution for your low, medium or high volume application.

Product features

• Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life
• Few moving parts in the air motor assembly means less downtime and low repair cost
• Displacement rods have minimal wear due to a proprietary Graco manufacturing process
• Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing
• Thick cast aluminum air motor housing offers unmatched durability

Fire-Ball series

• Durable. Thick cast aluminum air motor housing offers unmatched durability.
• Reduce Downtime. Displacement rods have minimal wear due to a proprietary Graco manufacturing process.
• Fewer Repairs. Fewer moving parts in the air motor assembly means less downtime and low repair cost.
• Superior Sealing. Non-metallic poppet valves offer positive sealing performance, even with contaminated “dirty” air environments for long life without repair.
• Reduced Icing. Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.
• Extended Seal Life. In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.
• Corrosion-Resistant. Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

TECHNICAL SPECIFICATIONS

Fire-Ball 300 (5:1)

• Maximum fluid working pressure: 62 bar, 6.2 MPa
• Fluid Pressure Ratio: 5:1
• Air pressure operating range: 2.8 to 12 bar, 0.28 to 1.2 MPa
• Maximum air consumption: 0.096 cubic m/min for first lpm pumped at 0.7 MPa, 7 bar, up to 0.058 additional cubic m/min for each additional lpm with pump operated within recommended range
• Pump cycles per gallon (liters): 7.9 per l
• Recommended speed for optimum pump life: 70 cycles per min
• Wetted Parts: steel, aluminum, buna-N, urethane
• Sound pressure level (measured at 1 m from unit): 77.8 dB(A)
• Sound power level (tested in accordance with ISO 9614–2): 85.6 dB(A)
• Approximate Weight: 7.7 kg

Fire-Ball 300 (15:1)

• Maximum working pressure: 186 bar
• Fluid pressure ratio: 15:1
• Air operating range: 3 to 12 bar
• Air motor effective diameter: 76 mm
• Stroke: 76 mm
• Air consumption: 0.476 sq m/l at 7 bar. Up to 0.84 sq m/min with pump operated at 12 bar and 66 cycles/min
• Pump cycles: 24 cycles/l
• Delivery: 3 l/min
• Maximum recommended continuous pump speed: 66 cycles/min, 32 l/min
• Recommended speed for optimum pump life: 15 to 25 cycles/min
• Wetted parts: Carbon Steel, Brass, Copper, Aluminum, PTFE, Nitrile Rubber, Leather
• Approximate weight: 10 kg

MATERIALS

• Motor Oil
• Gear Oil
• Hydraulic Fluid
• Oil
• Fluid Grease
• Grease NLGI #000 / #00 / #0 / #1 / #2

APPLICATIONS

• Lubrication
• Oil Transfer
• Grease Transfer
• Pumping
• Fluid Transfer

INDUSTRIES

• Manufacturing Equipment Lubrication Systems
• Trucking
• Fleets
• Dealerships and Quick Lubes – Pumps

L'articolo Fire-Ball 300 – Air-powered pumps and packages for oil or grease proviene da FORTEK.

Fire-Ball 425 are air-operated piston pumps for oil or grease. It is the pump of choice for your most demanding high volume applications.

The Fire-Ball 425 is perfect for fluid oil transfer in high volume and longer distance applications such as truck shop service fleet facilities and in-plant applications.

Product features

• Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life
• Few moving parts in the air motor assembly means less downtime and low repair cost
• Displacement rods have minimal wear due to a proprietary Graco manufacturing process
• Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing

Fire-Ball series

• Durable. Thick cast aluminum air motor housing offers unmatched durability.
• Reduce Downtime. Displacement rods have minimal wear due to a proprietary Graco manufacturing process.
• Fewer Repairs. Fewer moving parts in the air motor assembly means less downtime and low repair cost.
• Superior Sealing. Non-metallic poppet valves offer positive sealing performance, even with contaminated “dirty” air environments for long life without repair.
• Reduced Icing. Large air porting design provides efficient use of compressed air supply for continuous pump operation and reduced icing.
• Extended Seal Life. In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life.
• Corrosion-Resistant. Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life.

TECHNICAL SPECIFICATIONS

Fire-Ball 425 (6:1)

• Maximum working pressure: 76 bar, 7.6 MPa
• Fluid pressure ratio: 6:1
• Air operating range: 3 to 12 bar, 0.3 to 1.2 MPa
• Air consumption: 7 ft³/min per gallon pumped (0.051 m³/min per liter pumped) at 100 psi (7 bar, 0.7 MPa)
• Pump cycles per gallon (liter): 3.8 Liters
• Maximum recommended pump speed: 23 liter/min
• Recommended speed for optimum pump life: 15 to 25 cycles per min
• Piston seals: polyurethane with nitrile spreader
• Rod seals: polyurethane with nitrile spreader
• Wetted parts: aluminum, steel, polyurethane, nitrile
• Approximate weight: 21 kg
• Sound pressure level: 79.5 dB(A) (measured at 30 cycles per minute at 100 psi (7 bar, 0.7 MPa) air inlet pressure per ISO Standard 3744)

Fire-Ball 425 (10:1)

• Fluid pressure ratio: 10:1
• Air pressure operating range: 3–12.4 bar, 0.3–1.2 MPa
• Maximum working pressure: 124 bar, 12.4 MPa
• Maximum delivery: 19.7 lpm
• Cycles: 6 per l
• Max. recommended pump speed: 60 cycles per minute
• Air motor effective diameter: 108 mm
• Stroke: 102 mm
• Air consumption: approx. 6 m/hr³/l 0.7 MPa, 7 bar
• Wetted parts: steel, brass, aluminum, leather, Buna–N
• Weight: 17 kg
• Sound Pressure Level (Input Air Pressures at 15 cycles per minute) (Measured at 1 m from unit):
  • 0.28 MPa, 2.8 bar;
  • 73.6 dB(A): 0.48 MPa, 4.8 bar;
  • 78.34 dB(A): 0.7 MPa, 7 bar; 80.85 dB(A)
• Sound Power Level (Input Air Pressures at 15 cycles per minute) (Tested in accordance with ISO 9614–2):
  • 0.28 MPa, 2.8 bar;
  • 87.4 dB(A): 0.48 MPa, 4.8 bar;
  • 92.09 dB(A): 0.7 MPa, 7 bar;
  • 94.62 dB(A)

MATERIALS

• Motor Oil
• Gear Oil
• Hydraulic Fluid
• Automatic Transmission Fluid
• Oil
• Grease

APPLICATIONS

• Lubrication
• Oil Transfer
• Grease Transfer
• Pumping
• Fluid Transfer

INDUSTRIES

• Construction and Infrastructure
• Mining Equipment – Maintenance
• Upstream: Drilling and Completions
• Upstream Production Equipment for Oil and Gas
• Chemical Dosing Pumps for Refineries
• Heavy Equipment – Maintenance
• Forestry Equipment
• Paper Mills
• Dealerships and Quick Lubes – Pumps

L'articolo Fire-Ball 425 – Air-operated piston pumps for oil or grease proviene da FORTEK.

Product features

• Availalbe in carbon steel for petroleum-based or SST for water-based materials
• Durable air motor provides trouble-free operation

TECHNICAL SPECIFICATIONS

• Maximum working pressure: 186 bar
• Fluid pressure ratio: 15:1
• Air operating range: 3 to 12 bar
• Air motor effective diameter: 76 mm
• Stroke: 76 mm
• Air consumption: 0.476 sq m/l at 7 bar. Up to 0.84 sq m/min with pump operated at 12 bar and 66 cycles/min
• Pump cycles: 24 cycles/l
• Delivery: 3 l/min
• Maximum recommended continuous pump speed: 66 cycles/min, 32 l/min
• Recommended speed for optimum pump life: 15 to 25 cycles/min
• Wetted parts: Carbon Steel, Brass, Copper, Aluminum, PTFE, Nitrile Rubber, Leather
• Approximate weight: 10 kg

MATERIALS

• Automotive Undercoating

APPLICATIONS

• Fluid Dispense

INDUSTRIES

• Fleets
• Heavy Equipment – Maintenance
• Dealerships and Quick Lubes – Pumps

L'articolo Undercoating / rustproofing packages proviene da FORTEK.

Fast-Flo 1:1 pumps are designed to operate at air input pressures up to 180 psi (12 bar, 1.2 MPa) and deliver a smooth, reliable flow. Drum length and stubby models are available for either drum transfer or wall mount siphon feed applications. Ideal for lower viscosity fluids with plate (flat) check options. Drum length and stubby models are available in either carbon steel or stainless steel materials of construction. Fast-Flo 1:1 pumps are Ideal for a variety of non-corrosive and corrosive materials.

Downtime is frustrating and costly. Graco provides durable pumping solutions for your applications. Every pump is manufactured with your productivity in mind – providing you with a more reliable and efficient pump. Each pump is thoroughly tested before it leaves Graco’s factories.

Fast-Flo 1:1 – Product features

• Air-powered for high reliability and low cost
• Delivery up to 5 gpm (19 lpm)
• Available in stainless steel or carbon steel
• UL options available when installed in accordance with NFPA
• Immersed inlet for faster priming of heavier fluids
• Disc check options for lower viscosity fluids

TECHNICAL SPECIFICATIONS

• Maximum fluid working pressure: 12.4 bar (1.24 MPa – 180 psi)
• Maximum pump speed: 100 cpm
• Pump cycles per liter: 6.5
• Maximum air input pressure: 12.4 bar (1.24 MPa – 180 psi)
• Maximum operating temperature: 49°C (120°F)
• Typical sound level: 72 dBa
• Air inlet: 1/4 npt (f)
• Fluid outlet: 3/4 npt (f)
• Weight:
  • 9.07 kg (20 lbs) Drum
  • 4.99 kg (11 lbs) Stubby

MATERIALS

• Antifreeze
• Asphalts
• Windshield Washer Fluid
• Motor Oil
• Used Oil
• Hydraulic Fluid
• Oil
• Inks and Colorants

APPLICATIONS

• Oil Transfer
• Ink Transfer
• Pumping
• Fluid Transfer

INDUSTRIES

• Printing and Publishing – Ink Transfer
• Dealerships and Quick Lubes – Pumps
• Ink Transfer

L'articolo Fast-Flo 1:1 – Air-operated piston transfer pumps proviene da FORTEK.

With higher pump pressures and flow rates, the priming piston transfer pump King 24:1 can handle a broad range of inks with ease. They offer durability, power and reliability in many ink manufacturing or printing applications.

King 24:1 – Product features

• Produces up to 2400 psi when mounted on a 2100 pump
• Positive displacement, priming piston design provides uniform and easily-controlled delivery
• Evacuates with pails, drums and bins with ease
• Extremely durable pump with long-life packing design, and low maintenance

Graco: Leading the way in quality ink applications

The industry’s most reliable pumps: Graco offers the ink industry a complete line of Priming Piston and Diaphragm pumps. They offer a proven reliable design used by ink manufacturers and printers worldwide. Whether you are pumping high or low viscosity fluids from mixing tanks, bins, drums or pails, Graco has the perfect pumping solution.

Hydraulic or Pneumatic?

Graco offers both hydraulic and pneumatic motors to drive your priming piston pump. Both are top quality choices for smooth, continuous ink delivery.

• Pneumatic Motors. Graco’s King®, Bulldog®, Senator® and President® pneumatic motors provide rugged, reliable service life for ink manufacturing and printing applications.
• Hydraulic Motors. When paired with any of Graco’s priming piston pumps, the Viscount® II hydraulic motor offers exceptional cost savings by operating on 20% of the energy used by pneumatic motors.

TECHNICAL SPECIFICATIONS

• Lower size: 2100
• Maximum fluid pressure: 2400 psi (165 bar, 16.5 MPa)
• Maximum motor inlet pressure: 100 psi (air)  (6.9 bar, 0.69 Mpa)
• Flow rate @ 60 cpm: 7.5 gpm (28.4 lpm)
• Cfm or gpm required per gallon: 25 cfm
• Fluid pump outlet size: 1-1/2″ npt (m)
• Weight of pump: 160 lb (73 kg)

 MATERIALS 

• Inks and Colorants

INDUSTRIES

• Letterpress and lithographic ink manufacturing
• Flexographic and gravure ink manufacturing
• Magazine and commercial printers
• Newspaper printers

APPLICATIONS

• Supplying ink to press fountains
• Supplying raw ink
• Evacuating to dispersion tanks
• Supplying ink to milling equipment
• Supplying ink to batch dispensing systems
• Waste water treatment
• Pumping solvents for ink wash systems

L'articolo King 24:1 – Priming piston transfer pumps proviene da FORTEK.

These Graco long-lasting piston pumps with sealed wet cup have an enclosed, dual seal wet cup design with an extended seal life – ideal for the most difficult inks. Available with hydraulic or pneumatic motors and an optional runaway control.

Long-lasting piston pumps with sealed wet cup – Product features

• Prolong seal life with enclosed, dual seal wet cup
• Runaway control with optional DataTrak
• MaxLife seal for longer life
• Handles the most difficult inks
• Available with hydraulic or pneumatic motors

Graco: Leading the way in quality ink applications

The industry’s most reliable pumps: Graco offers the ink industry a complete line of Priming Piston and Diaphragm pumps. They offer a proven reliable design used by ink manufacturers and printers worldwide. Whether you are pumping high or low viscosity fluids from mixing tanks, bins, drums or pails, Graco has the perfect pumping solution.

Hydraulic or Pneumatic?

Graco offers both hydraulic and pneumatic motors to drive your priming piston pump. Both are top quality choices for smooth, continuous ink delivery.

• Pneumatic Motors. Graco’s King®, Bulldog®, Senator® and President® pneumatic motors provide rugged, reliable service life for ink manufacturing and printing applications.
• Hydraulic Motors. When paired with any of Graco’s priming piston pumps, the Viscount® II hydraulic motor offers exceptional cost savings by operating on 20% of the energy used by pneumatic motors.

TECHNICAL SPECIFICATIONS

• Ratio: 55:1
• Maximum fluid working pressure: 34 MPa, 341bar
• Maximum air input pressure: 0.6 MPa, 6.2bar
• Pump cycles per 3.8 liters (1 gal.): 40
• Fluid Flow at 60 cycles/min: 5.7 liters/min
• Air motor piston effective diameter: 146 cm
• Stroke length: 120 mm
• Displacement pump effective area: 4.5 cm²
• Maximum pump operating temperature: 82°C
• Weight: approx. 45kg
• Wetted parts: Carbon Steel; E52100, 41L40, and 4140 Alloy Steel; 304, 316 and 17-4 PH Grades of Stainless Steel; Ductile Iron; Zinc and Nickel Plating; PTFE; Acetal; Ultra-High Molecular Weight Polyethylene (not used on Displacement Pump 235540)

 MATERIALS 

• Inks and Colorants

INDUSTRIES

• Letterpress and lithographic ink manufacturing
• Flexographic and gravure ink manufacturing
• Magazine and commercial printers
• Newspaper printers

APPLICATIONS

• Supplying ink to press fountains
• Supplying raw ink
• Evacuating to dispersion tanks
• Supplying ink to milling equipment
• Supplying ink to batch dispensing systems
• Waste water treatment
• Pumping solvents for ink wash systems

L'articolo Piston pumps with sealed wet cup proviene da FORTEK.

With higher pump pressures and flow rates, Graco priming piston pumps President 20:1 handle a broad range of inks with ease. They offer durability, power and reliability in many ink manufacturing or printing applications.

President 20:1 – Product features

• Produces up to 2000 psi (137 bar) when mounted on a 450 pump
• Positive displacement, priming piston design provides uniform and easily-controlled delivery
• Evacuates with pails, drums and bins with ease
• Extremely durable pump with long-life packing design, and low maintenance

Graco: Leading the way in quality ink applications

The industry’s most reliable pumps: Graco offers the ink industry a complete line of Priming Piston and Diaphragm pumps. They offer a proven reliable design used by ink manufacturers and printers worldwide. Whether you are pumping high or low viscosity fluids from mixing tanks, bins, drums or pails, Graco has the perfect pumping solution.

Hydraulic or Pneumatic?

Graco offers both hydraulic and pneumatic motors to drive your priming piston pump. Both are top quality choices for smooth, continuous ink delivery.

• Pneumatic Motors. Graco’s King®, Bulldog®, Senator® and President® pneumatic motors provide rugged, reliable service life for ink manufacturing and printing applications.
• Hydraulic Motors. When paired with any of Graco’s priming piston pumps, the Viscount® II hydraulic motor offers exceptional cost savings by operating on 20% of the energy used by pneumatic motors.

TECHNICAL SPECIFICATIONS

• Ratio: 20:1
• Maximum fluid working pressure: 25 MPa, 248 bar
• Maximum air input pressure: 1.2 MPa, 12 bar
• Pump cycles per 3.8 liters (1 gal.): 48
• Fluid flow at 60 cycles/min: 4.5 liters/min (1.2 gpm)
• Air motor effective diameter: 108 mm
• Stroke length: 102 mm
• Displacement pump effective area: 4.5 cm²
• Maximum pump operating temperature: 82°C
• Weight: 22.7 kg
• Wetted parts: Carbon Steel; E52100, 41L40, and 4140 Alloy Steel; 304, 316 and 17-4 PH Grades of Stainless Steel; Ductile Iron; Zinc and Nickel Plating; PTFE; Acetal; Ultra-High Molecular Weight Polyethylene (not used on Displacement Pump 235540)

MATERIALS

• Inks and Colorants

INDUSTRIES

• Letterpress and lithographic ink manufacturing
• Flexographic and gravure ink manufacturing
• Magazine and commercial printers
• Newspaper printers

APPLICATIONS

• Supplying ink to press fountains
• Supplying raw ink
• Evacuating to dispersion tanks
• Supplying ink to milling equipment
• Supplying ink to batch dispensing systems
• Waste water treatment
• Pumping solvents for ink wash systems

L'articolo President 20:1 – Priming piston ink pumps proviene da FORTEK.