Designed to meet USDA (United States Department of Agriculture – Dairy Division) standards, these pumps are the ultimate in leak protection and clean pumping with the paired performance of AODD technology.  Whether in a clean-in-place or clean-out-of-place application, these pumps will exceed the need for reliability and cleanability.  Some of their most exceptional features include:

• Leak Detection
  Pair with Electronic Leak Detection for full USDA compliance.
• Materials Of Construction
  Electropolished 316 and 302/304 Stainless Steel components.
• Porting Options
  Rotatable manifolds, and top or bottom discharge available.

They are ideal for liquids with medium or high viscosity and a solid step up to 27.4 mm. All models have certified elastomers for food uses.

• Models available: from 1″ to 2″1/2
• Flow rates: from 204 l/min to 570 l/min

L'articolo SandPiper – USDA proviene da FORTEK.

The SandPiper FDA (Food & Drug Administration) pumps are available in 1″ through 3″ ball check valve designs and a 2″ (line size solids handling) flap check valve design. Variable flow capacities across the range are 0–235 gallons per minute.

These special duty pumps are constructed of FDA compliant material components of Stainless Steel (wetted castings) and a selection of FDA Santoprene, FDA Nitrile and PTFE diaphragms, check valves and valve seats. Standard non-wetted components are white epoxy coated Aluminum with stainless steel hardware. 1″, 1½” and 2″ pumps are offered with sanitary clamp fittings and 3″ pumps are offered with an ANSI flange.

• Materials Of Construction
  Electropolished 316 and 302/304 Stainless Steel components.
• Porting Options
  Rotatable manifolds, and top or bottom discharge available.

L'articolo SandPiper – FDA proviene da FORTEK.

FEATURES

• Lubrication free air distribution system
• Maintenance free ball check valve system
• Total visual inspection of the wetted parts

The design ensures a total visual inspection of the wetted parts. There are no hidden areas where bacteria can grove. The manifolds clamps and the housing screws are simply removed for complete disassembly and cleaning.

The DELLMECO sanitary pump  is also designed for cleaning and sterilization in place.

After such operations, the pump is easily turned in its support for drainage.

TECHNICAL SPECIFICATIONS

L'articolo DELLMECO H – Sanitary series proviene da FORTEK.

All SandPiper CD pumps are exclusively designed with containment chambers, hydraulically balanced/coupled pumping diaphragm and driver diaphragm assemblies. All containment chambers are designed to accommodate visual, mechanical and low voltage leak detection devices.

The SandPiper CD pumps are constructed of Aluminum, Cast Iron, Stainless Steel, Alloy C, Polypropylene and PVDF with TPE (thermal plastic elastomers), PTFE options in diaphragms and check valves.

L'articolo SandPiper – Containment Duty (CD) proviene da FORTEK.

The plastic pumps for high-pressures Dellmeco can reach pressures of 16 bar, thanks to a pressure multiplier.
The pump housings are available in polyethylene and Teflon at high molecular density; ATEX in the conductive configuration.
Flow rates range from 55 l/min to 565 l/min.

L'articolo Dellmeco – High pressures proviene da FORTEK.

The plastic double diaphragm pneumatic pumps Husky 1050 replace the ones of the 1040 series, now obsolete, against which they present a series of improvements: the membranes last up to five times as much and it is possible a 20% increase of the flow of the fluid, ensuring an effective performance of up to 189 l/min. Moreover, thanks to the one-piece center section you can prevent air leakage in favor of a more efficient operation.

The plastic double diaphragm pneumatic pump Husky 1050 is equipped with modular pneumatic valve to ensure a low-pulse without stalling operation, allowing a uniform and rapid exchange.

The plastic double diaphragm pneumatic pump Husky 1050 are made of polypropylene, conductive polypropylene, PVDF and they are destined for pumping chemicals and medium-low viscosity materials such as paints, detergents, hydraulic fluids, waste water.

TECHNICAL SPECIFICATIONS

• Connection Dimensions: 25.4 mm (1 in)
• Thread type: flange ANSI / DIN
• Pneumatic valve: Standard, smart and remote
• Maximum capacity: 189 l / min (50 gpm)
• Maximum discharge pressure 8.6 bar (0.9 MPa – 125 psi)
• Construction materials available: polypropylene, conductive polypropylene, PVDF
• Midsection available: polypropylene, conductive polypropylene
• Pump weight: Polypropylene 8.2 kg (18 lb); PVDF 9.5 kg (21 lb)
• Maximum solids content: 3.2 mm (0.125 in)

General catalogue – Graco Husky process pumps

L'articolo Husky 1050 – Double diaphragm pneumatic pump in plastic proviene da FORTEK.

The  plastic double diaphragm pneumatic pumps Husky 1590 are equipped with a closed central pneumatic valve, patented and easy to maintain, as well as an air section with epoxy resin coating for use in harsh environmental conditions.

Thanks to the choice of building materials, Graco Husky 1590 pumps are suitable for several applications.

The plastic double diaphragm pneumatic pumps Husky 1590 has a compact and robust design and is made of polypropylene (for transferring fluids in the chemical), or Kynar (for applications involving aggressive fluids and high temperatures).

All models are available with membranes and balls made of different materials, according to the specific needs of each installation and application.

TECHNICAL SPECIFICATIONS

• Connection Dimensions: 38.1 mm (1-1 / 2)
• Thread type: ANSI flange
• Pneumatic valve: Standard and remote
• Maximum capacity: 379 l / min (100 gpm)
• Maximum discharge pressure 8.3 bar (0.8 MPa – 120 psi)
• Construction materials available: Polypropylene, PVDF
• Midsection available: coated aluminum, stainless steel 316
• Pump weight: Polypropylene 16 kg (35 lb); PVDF 22 kg (49 lb)
• Maximum solids content: 4.8 mm (0.188 in)

General catalogue – Graco Husky process pumps

L'articolo Husky 1590 – Double diaphragm pneumatic pump in plastic proviene da FORTEK.

The plastic double diaphragm pneumatic pumps Husky 2150/2200 are equipped with highly reliable patented pneumatic valves which are modular and easy to maintain. The pump has a central one-piece polypropylene section that ensures safety and chemical compatibility.

TECHNICAL SPECIFICATIONS

• Connection size: 50.8 mm (2 in)
• Thread type: ANSI flange
• Pneumatic valve: Standard and remote
• Maximum capacity: 757 l / min (200 gpm)
• Maximum discharge pressure: 8.6 bar (0.86 MPa – 125 psi)
• Construction materials available: Polypropylene, PVDF
• Midsection available: Polypropylene
• Weight of the pump: 36.3 kg Polypropylene (80 lb); PVDF 48.1 kg (106 lb)
• Maximum solids content: 6.3 mm (0.25 in)

General catalogue – Graco Husky process pumps

L'articolo Husky 2150/2200 – Double diaphragm pneumatic pump in plastic proviene da FORTEK.

The plastic double diaphragm pneumatic pumps Husky 3300 are equipped with spring-loaded pilot valves which are serviceable from the outside, making maintenance easier.

The plastic double diaphragm pneumatic pumps Husky 3300 are designed for transfering chemicals and low to medium viscosity materials.

The plastic double diaphragm pneumatic pump Husky 3300 is equipped with a shaped frame which, in addition to eliminating any losses, allows a lower wear of the gaskets.

TECHNICAL SPECIFICATIONS

• Connection Dimensions: 76.2 mm (3 in)
• Thread type: ANSI / DIN
• Pneumatic valve: Standard
• Maximum flow: 1059 l / min (280 gpm)
• Maximum discharge pressure: 7 bar (0.7 MPa – 100 psi)
• Construction materials available: Polypropylene
• Midsection available: Polypropylene
• Pump weight: 90.7 kg Polypropylene (200 lb)
• Maximum solids content: 12.7 mm (0.5 in)

General catalogue – Graco Husky process pumps

L'articolo Husky 3300 – Double diaphragm pneumatic pump in plastic proviene da FORTEK.

The plastic double diaphragm pneumatic pumps Husky 15120, intended for the transfer of fluids and chemicals with low to medium viscosity, are equipped with a patented modular pneumatic valve for easy maintenance.

The plastic double diaphragm pneumatic pumps Husky 15120 have an immersion frame that ensures greater reliability and chemical compatibility, eliminating fluid leaks.

TECHNICAL SPECIFICATIONS

• Connection Dimensions: 38.1 mm (1.5 in)
• Thread type: ANSI / DIN
• Maximum capacity: 454 l/min (120 gpm)
• Maximum discharge pressure 8.6 bar (0.86 MPa – 125 psi)
• Construction materials available: Polypropylene, PVDF
• Midsection available: Polypropylene
• Pump weight: Polypropylene 25.9 kg (57 lb); PVDF 33.6 kg (74 lb)

General catalogue – Graco Husky process pumps

L'articolo Husky 15120 – Double diaphragm pneumatic pump in plastic proviene da FORTEK.