The JUNG HYGHSPIN twin screw pumps are made of stainless steel.

The HYGHSPIN pump is suitable for use with free-flowing products of almost any consistency (whether aqueous, highly viscous, lumpy, fibrous or gaseous) and works with maximum efficiency. This particularly servicing-friendly twin screw pump with its outstandingly high suction performance gently handles all free-flowing products in volumes up to 300 m3 /h. No additional pump for CIP cleaning is required, which offers considerable time and cost savings thanks to lower investment and servicing costs.

APPLICATIONS

• Food manufacturing, e.g. dairy industry, delicatessen products, ketchups and sauces, confectionery and baby food
• Beverage manufacturing, e.g. fruit juices, syrups and concentrates, breweries
• Pharmaceutical industry
• Cosmetics industry, e.g. creams, pastes, lotions
• Chemical industry, e.g. adhesives, solvents, paints and varnishes, plastics And in many other industries where materials with a wide range of viscosities need to be transported.

TECHNICAL SPECIFICATIONS

• Capacity: 30 l/h–300 m³/h (100 l/h–350 m³/h*)
• Delivery pressure: Up to 35 bar
• Suction capacity: NPSHr up to 0.5 m Viscosity 0.5 – 1.000.000 cSt
• Product temperature: –10 to 130 °C, (higher temperatures on request)
• Cleaning temperature: Up to 140 °C
• Sterilisation temperature: Up to 145 °C
• Material for product-contact parts: 1.4404 with 3.1 certificate (other materials on request)
• Elastomers: HNBR and FDA-approved (other elastomers on request)

L'articolo Jung HYGHSPIN twin screw pumps proviene da FORTEK.

Typical Users

• Fast lubes
• Car/truck dealerships
• Municipalities and transits
• Construction equipment and fleet maintenance shops
• Lube trucks
• Manufacturing plants
• General service shops

Typical Fluids

• Lubricating grease
• Motor, synthetic, hydraulic and gear oils
• Automatic transmission fluid
• Undercoating
• Rustproofing
• Sound deadening

Fire-Ball®: The Industry’s Most Trusted Piston Pumps

• Durable. Thick cast aluminum air motor housing offers unmatched durability
• Fewer Repairs. Few moving parts in the air motor assembly means less downtime and low repair cost
• Corrosion-Resistant. Corrosion-resistant design utilizes liquid salt nitriding, nickel plating, stainless steel, aluminum and chrome on key components for longer life
• Reduce Downtime. Displacement rods have minimal wear due to a proprietary Graco manufacturing process
• Eliminating Icing. Large air porting design provides efficient use of compressed air supply for continuous pump operation without icing
• Extended Seal Life
  • In-line pump design aligns the air motor piston and fluid piston rods to maximize seal life
  • Throat packings have a u-cup design with a hardened steel displacement rod to minimize wear
  • Non-metallic poppet valves offer positive sealing performance, even with contaminated “dirty” air environments for long life without repair

NXT Technology: Move Large Amounts of Oil and Grease Fast

Dispenses up to 117 liter (31 gallons) of oil or 26 kg (57 pounds) of grease a minute

• Tested to outperform and outlast all other pumps on the market with its long-life packing design
• Intuitive, easy-to-use controls
• Best value for the money–fewer parts, faster repairs and long-lasting durability

APPLICATIONS

• In-Plant
  • Supply long-pipe runs or large volume header systems with multiple dispense locations
  • Fill remote reservoirs or feed an automated lubrication system
  • Transfer and dispense large amounts of lubricant to supply a production process
• Mines/Construction
  • Rapid fill of lube trucks
  • Service off-road equipment needing high volume transfers of oil or transmission fluids
  • Feed lubricant to a mine or construction process
• Fleets (municipal, military, aviation)
  • Rapid transfer or dispense of lubricants to service fleet equipment
  • Supply large volume header systems with multiple dispense locations

L'articolo Lubrication pumps – Outstanding performance and reliability proviene da FORTEK.

The liquid ring self-priming and reversible pumps Liverani are available both made of stainless steel AISI 316 and bronze.

According to the construction material the pumps find good applications in several fields: Oenological field and food processing (wine, must, vinegard, oil, fruit juice, bier, sirups and pickle), dairy field (milk, whey, etc.), chemical field (acids, solvents, photographic liquids, cleaning products, ink, etc.), agriculture field (anticryptogamics, liquid fertilizers, gas oil, etc.), nautic field (sea water, sweet water, gas oil, etc.).

APPLICATION FIELDS

• oenological field and food processing (wine, must, vinegard, oil, fruit juice, bier, sirups and pickle)
• dairy field (milk, whey, etc.)
• chemical field (acids, solvents, photographic liquids, cleaning products, ink, etc.)
• agriculture field (anticryptogamics, liquid fertilizers, gas oil, etc.)
• nautic field (sea water, sweet water, gas oil, etc.).

OPERATING FEATURES

The star impeller, grazing the pump head and the front cover, creates a suction pressure which allows the transferring of the liquid which goes, by the load port, from the inlet chamber to the discharge port and then to the outlet chamber.

• Selfpriming, also with gas presence and in case of discontinuos flow of liquid
• Reversible
• Transferring without pulsation effect
• Dry operating

ACCESSORIES

• Trolley and handle for electric pumps
• By-pass valve
• Terminal board connection
• On-off/reverse switch

AVAILABLE MODELS (Please check the Technical catalogue out for details)

• SPECIAL – Pumps with pulley
• SPECIAL FM – Pumps with magnetic clutch
• EPH/EP – Bronze electric pumps
• EP – Stainless steel AISI 316 electric pumps
• MID – Pumps for hydraulic motor
• LALX – Pumps with overdrive
• NAUTIC – Pumps with pulley
• NAUTIC F – Pumps with hand clutch
• GR ADPE – Explosion proof groups without control panel
• FALCO – Pumps with internal combustion engine

About the manufacturer

Born during the ‘50s, Liverani manufactures and exports its pumps and presses all over the world. All its products are produced according to CE standards and the high quality of raw materials and technology allow excellent performances together with a simple use and maintainance of the pumps. The wide range of products, the materials and the numerous pump versions allow a very wide range of applications.

L'articolo Liquid ring self-priming and reversible pumps proviene da FORTEK.

Therm-O-Flow 20 offers improved throughput, better process monitoring and reliable, efficient operation.

ADVANTAGES

• Improve process efficiency
  • Keep your production running with automatic electric crossover when using tandem units
• Improve production capability
  • Smaller footprint lets you place unit near the application
  • Capable of melt rates up to 1.3 lb/min (0.6 kg/min)
• Reduce energy costs
  • Inactivity shutoff and temperature setback reduces energy costs
• Supply factory environment initiatives
  • Graco NXT Air Motors operate around 87 decibels while other comparable motors operate up to 103 decibels

Therm-O-Flow 20 – Product features

Intuitive, easy to use controls

• Displays actual and set point temperatures for up to 12 zones per unit
• Material tracking and machine diagnostics can be downloaded to USB
• Provides programmable preventative maintenance schedules
• Languages supported: English, Spanish, German, French, Chinese, Japanese, Portuguese, Italian and Korean

Merkur & NXT Air Motor Technology

• Provides quiet, reliabile, efficient operation
• Proven Graco technology

TECHNICAL SPECIFICATIONS

• Air inlet size: 1/2 npsm(f)
• Air motor sound data: See air motor instruction manual.
• Wetted Parts: carbon steel, brass, chrome, zinc, nickel plating, stainless steel (304, 316, 440, and 17–4 PH), alloy steel, ductile iron, PTFE
• Displacement pump effective are:
  • Merkur and NXT: 8 cm²
  • President: 5.7 cm²
• Volume per cycle
  • Merkur and NXT: 192 cm³
  • President: 62.3 cm³
• Pump cycles per 1 gallon (3.8 liters)
  • Merkur and NXT: 21
  • President: 61
• Ram maximum input pressure
  • Merkur and NXT: 0.85 MPA, 8.5 bar
  • President: 0.8 MPa, 8.3 bar
• Maximum pump operating temperature:
  • Merkur and NXT: 204°C
  • President: 204°C
• Pump fluid outlet size
  • Merkur and NXT: 1 in npt(f)
  • President: 1/2 in npt(f)
• Maximum Fluid Working Pressure
  • Merkur 6.0 in: 15.9 MPa, 159 bar
  • Merkur 7.5 in: 20.7 MPa, 207 bar
  • NXT 6500: 20.7 MPa, 207 bar
  • President 4.25 in: 12.6 MPa, 125 bar
• Maximum Air Input Pressure (Pumps)
  • Merkur 6.0 in: 0.7 MPa, 7 bar
  • Merkur 7.5 in: 0.57 MPa, 5.7 bar
  • NXT 6500: 0.29 MPa, 2.9 bar
  • President 4.25 in: 0.8 MPa, 8.3 bar
• Power Requirements
  • Compressed Air (typical): 25–50 scfm
  • Voltage (as selected):
    220/240 V, 3-phase, 50/60 Hz
    380/400 V, 3-phase, 50/60 Hz
    470/490 V, 3-phase, 50/60 Hz
    575 V, 3-phase, 50/60 Hz
• Peak Consumption (includes drum melt grid, pump, and a 6kVa transformer for the 230 V hoses and accessories)
  • Standard melt grid platen with President pump: 6.4 kVa
  • Standard melt grid platen with Merkur or NXT pump: 8.7 kVa
  • Smooth melt grid platen with President pump: 6.4 kVa
  • Smooth melt grid platen with Merkur or NXT pump: 8.7 kVa

APPLICATIONS

• High-Viscosity Material Transfer
• Bulk Supply System
• Adhesive Bonding
• Fenestration
• Roll Coating
• Curtainwall
• Resin Batch Blending
• Prepreg Supply
• Wood Finishing – Bonding and Laminating

INDUSTRIES

• Automotive Trim and General Assembly
• Automotive Composites
• Solar Energy
• Furniture Finishing / Manufacturing
• Bookbinding
• RVs and Trailers
• Wood Lamination

L'articolo Therm-O-Flow 20 – Bulk Hot Melt systems proviene da FORTEK.

The Therm-O-Flow 200 is an industrial bulk hot melt glue machine system that outperforms the competition with great production throughput, better process monitoring and reliable, efficient operation.

Improve process efficiency

• Keep your production runnnig with automatic electric crossover when using tandem units

Improve production capabililty

• Highest throughout capability in the industry when tested and compared to leading competitor using PSA and butyl hot melt adhesives
• Capable of melt rates up to 11 lb/min (5 kg/min)

Reduce energy costs

• Inactivity shutoff and temperature setback reduces energy costs

Supply factory environment initiatives

• Graco NXT Air Motors operate around 87 decibels while other comparable motors operate up to 103 decibels

Therm-O-Flow 200 – Product features

Intuitive, easy to use controls

• Displays actual and set point temperatures for up to 12 zones per unit
• Material tracking and machine diagnostics can be downloaded to USB
• Provides programmable preventative maintenance schedules
• Languages supported: English, Spanish, German, French, Chinese, Japanese, Portuguese, Italian and Korean

Merkur & NXT Air Motor Technology

• Provides quiet, reliable efficient operation
• Proven Graco technology

TECHNICAL SPECIFICATIONS

• Displacement Pump Effective Area: 1.24 sq in
• Volume per Cycle: 11.7 cu in
• Pump Cycles: 21/1 gal
• Maximum Air Input Pressure (Ram): 125 psi
• Maximum Pump Operating Temperature: 400 °F
• Air Inlet Size: 1/2 npsm(f)
• Pump Fluid Outlet Size: 1 in. npt(f)
• Wetted Parts: Carbon steel; brass; chrome, zinc, and nickel plating; 304, 316, 440, and 17–4 PH grades of stainless steel; alloy steel; ductile iron; PTFE
• Weight: 1200 lb
• Displacement Pump Weight: 81 lb
• Maximum fluid working pressure
  • NXT 2200: 2300 psi
  • NXT 3400: 3000 psi
  • NXT 6500: 3000 psi
• Maximum air input pressure (pumps):
  • NXT 2200: 100 psi
  • NXT 3400: 82 psi
  • NXT 6500: 43 psi
• Air Motor Piston Effective Area
  • NXT 2200: 28.3 sq in
  • NXT 3400: 44.2 sq in
  • NXT 6500: 84.5 sq in
• Instruction Manuals
  • Heated Hoses: 309160
  • Wiper Kits: 309196
  • Bare Displacement Pump Lower: 308570
  • 6.5 in. (165 mm) Global Ram Module: 310523
• Power Requirements
  • Compressed Air: 25–50 scfm (typical)
  • Voltage (as selected)

220/240 V, 3-phase, 50/60 Hz

380/400 V, 3-phase, 50/60 Hz

470/490 V, 3-phase, 50/60 Hz

575 V, 3-phase, 50/60 Hz

• Peak Consumption
  • With standard melt grid: 24.5 kVa
  • With mega-Flo melt grid: 27.5 kVa
  • With smooth melt grid: 24.5 kVa

APPLICATIONS

• High-Viscosity Material Transfer
• Bulk Supply System
• Adhesive Bonding
• Fenestration
• Roll Coating
• Curtainwall
• Resin Batch Blending
• Resin Saturation
• Wood Finishing – Bonding and Laminating

INDUSTRIES

• Automotive Trim and General Assembly
• Automotive Composites
• Solar Energy
• Furniture Finishing / Manufacturing

L'articolo Therm-O-Flow 200 – Bulk Hot Melt systems proviene da FORTEK.

The Therm-O-Flow guns are manual and automatic dispense applicators for applying hot melt materials.

Perfect for high pressure, high flow sealant and adhesive applications, Therm-O-Flow Guns are available with electric switches so they can be used in conjunction with automated equipment.

Therm-O-Flow guns – Product features

• Precise temperature control from PID control panel
• Piston-actuated ball and seat design for positive shut off
• Light trigger pull
• Rugged all metal construction

The most advanced technology on the market

With throughput capability 200% better than the leading competitor, Therm-O-Flow® bulk hot melt systems from Graco outperform the competition time after time and provide the best performing industrial bulk melt systems on the market. Therm-O-Flow’s advanced temperature control capability virtually eliminates overheated material, resulting in better adhesive quality and reduced rework due to degraded material. Graco offers a complete line of Therm-O-Flow bulk hot melt systems and “point of use” melt systems – each can be configured to fit your specific application.

ADVANTAGES

• Improve process efficiency
  • Keep your production runnnig with automatic electric crossover when using tandem units
• Improve production capabililty
  • Highest throughout capability in the industry when tested and compared to leading competitor using PSA and butyl hot melt adhesives
  • Capable of melt rates up to 11 lb/min (5 kg/min)
• Reduce energy costs
  • Inactivity shutoff and temperature setback reduces energy costs
• Supply factory environment initiatives
  • Graco NXT Air Motors operate around 87 decibels while other comparable motors operate up to 103 decibels

TECHNICAL SPECIFICATIONS

• Maximum operating temperature: 400°F
• Maximum fluid working pressure: 5000 psi
• Outlet port size: 5/8-18 UNF-2B
• Inlet port size on gun housing: 7/8-14 UNF- 2B
• Inlet port size on fluid swivel: 7/8-14 JIC(m)
• Voltage: 230/240 Vac
• Wattage: 120 W
• Resistance temperature detector(platinum RTD; 0.00385 ohm/ohm/°C): 108.2 ohms @ 70°F
• Heater resistance
  • individually: 890 ohms, +/- 70 ohms
  • wired in parallel: 445 ohms, +/- 35ohms
• Weight: without swivel: 2.7 lb; with swivel: 3.4 lb / 1.5 kg
• Dimensions
  • Height: 191 mm
  • Width: 76 mm
  • Length:
  • Models 249514 and 249515: 229 mm
  • Models 249512 and 249513: 267 mm
  • Models 297273 and 297274: 292 mm
• Wetted parts: Aluminum, fluorocarbon rubber, stainless steel, PTFE, carbon steel, brass

MATERIALS

• Structural Adhesives
• Polymers

APPLICATIONS

• Adhesive Bonding
• Fenestration
• Wood Finishing – Bonding and Laminating

INDUSTRIES

• Automotive Trim and General Assembly
• Furniture Finishing / Manufacturing

L'articolo Therm-O-Flow Guns – Dispense applicators for hot melt materials proviene da FORTEK.

The ambient supply systems are bulk unloaders for ambient sealants, adhesives and other medium to high-viscosity materials.

Graco supply systems reliably deliver one-component sealants, adhesives and other medium to high-viscosity materials from pails or drums to metering and dispensing systems.

For magnadrums & tote drums up to 1200 liter (300 gal)

The Uni-Drum supply system evacuates 300 gallon (1200 liter) magnadrums and other tote drums of the same size and capacity.

• Pumps and transfers highly viscous materials from bulk drums with maximum efficiency
• Built to work with other high pressure equipment to optimize material use

For large drums up to 200 liter (55 gal)

• Graco D200 – For high-volume in-plant applications
• Graco D200s – For heavy-duty, high-volume applications of high-viscosity materials. Provides more down-force for difficult-to-move materials

For pails up to 60 liter (16-gal)

For 20, 30 and 60 liter (5, 7, and 16-gal) pail sizes. Provides the same proven technologies as the larger systems, but with small NXT Air Motors.

• Graco L20c – A lightweight, elevator ram on a cart
• ”  ” ”   S20 – For low-volume applications of medium to high-viscosity materials
• Graco S20c – Same as the S20, but includes a cart
• ”  ” ”   D60 – Provides higher down-force and 60-liter pail capacity

For 1 quart (0.95l) or 1 gallon (3.79l) containers

The Graco DynaMite Pump utilizes the NXT air motor to provide the power necessary to move viscous materials from small containers.

• Manual or automatic valve applications
• Ideal for small manufacturing workcells and industrial workbench applications
• 
Typical fluids handled:
  • Sealants and Adhesives
  • Potting and Heatsink Compounds
  • 
Encapsulants
  • Grease
  • 
Inks and Colorants

TECHNICAL SPECIFICATIONS

• Max air input pressure (supply system) / Air inlet size
  • L20c – 2 in elevator, 5 gal (20 l): 100 psi / 1/2 npsm(f)
  • S20 – 3 in single post, 5 gal (20 l): 125 psi / 1/2 npt(f)
  • D60 – 3 in dual post, 16 gal (60 l), 5 gal. (20 l), 30 gal: 150 psi / 3/4 npt(f)
  • D200 – 3 in dual post, 55 gal (200 l), 30 gal (115 l),16 gal (60 l), 8 gal (30 l), 5 gal (20 l): 150 psi / 3/4 npt(f)
  • D200s – 6.5 in dual post, 55 gal (200 l), 30 gal (115 l): 125 psi / 3/4 npt(f)
• Max fluid, air working pressure. and weight (displacement pump):
  For Check-Mate pump packages, see manual 312376. For Dura-Flo pump packages, see manuals 311826, 311828, 311833.
• Ambient operating temperature range (supply system): 32-120°F
• Sound data: See separate air motor manual.
• External power supply requirements (DatraTrak)
  • AC power units: 100-240 Vac, 50/60 Hz, single phase, 1.2 amps max
  • DC power units: 24 Vdc, 1.2 amps max draw

MATERIALS

• Contact Cements
• Sealants
• Mastics
• Epoxy Sealants and Adhesives
• Silicones
• Dow Corning® 983 Silicone

APPLICATIONS

• Bulk Supply System
• Medium-Viscosity Material Transfer
• Adhesive Bonding
• Automotive Hem-Flange Bonding
• Roll Coating
• Curtainwall
• Thermal Management
• Composites Open Molding
• Resin Batch Blending
• Resin Saturation
• Prepreg Supply

INDUSTRIES

• Automotive Trim and General Assembly
• Powertrain
• Body Shop Sealing
• Automotive Electronics / Under the Hood
• Automotive Composites
• Wind Power – Blades
• Chemical Manufacturing
• Electronics Manufacturing
• Furniture Finishing / Manufacturing

L'articolo Ambient supply systems for sealants and adhesives proviene da FORTEK.

The stainless steel low-speed rotary pumps with flexible impeller Liverani are widely used in the following sectors:

• OENOLOGICAL field (wine, must, must and stemmed grapes)
• FOOD processing (beer, fruit pulp and juice, honey, liquid sugar, syrups, glucose, milk, melted butter, yoghurt, liquid eggs, oil, tomatoes pulp and juice , brine, etc.)
• CHEMICAL INDUSTRY (starch, water based glues, emulsions, glycerine, wax, detergents, rubber latex, photographic processing liquids, polyelectrolyte, paints, ink, industrial discharges, etc.)
• COSMETIC and PHARMACEUTICAL production (liquid soap, cleaning lotion, cream, shampoo, etc.).

The easy mounting principle, the multiple choice of production materials and the Quality System procedure applied throughout production, allow us to offer a wide, versatile and customized product range. Every pump range can be produced with different impeller types, mechanical gasket, couplings and in numerous executions, which are: bare shaft pump; coaxial motorized pump (with electric or orbital hydraulic motor); with gearmotor; with pulley (on trolley or base); with mechanical speed variator or with frequency converter.

USES

• Transfer
• Filling
• Emptying
• Recycling and mixing
• Filtering and separation
• Metering

OPERATING FEATURES AND BENEFITS

Pump principle – The flexible impeller vanes deform slightly to pump the liquid inside the pump and move it to the discharge port at a stedy flow rate. This principle combines gentle pumping with a high self-priming action.

• Self-priming (automatic priming of the product up to 6 m even from dry start-up).
• Reversible operation (the pump can operate in both rotation directions, which permits return of excess liquid without any manual intervention, and also allows easy emptyng of pipes on completion of liquid transfer).
• Excellent priming action even at a low revolutions, which allows the transfer of soft and fragile fluids with viscosities up to 50.000 cp, or with solid particles in suspension, without causing air-locking, avoiding emulsifying or damaging particles.
• Smooth steady pumping action of the product without pressure spikes (even flow rate ideal for filling, dosing or filtration).
• The pump can work in all mounting positions.

TECHNICAL SPECIFICATIONS

• Flows: 0 up 72.000 litres/hour
• Viscosities: up to 50.000 cp
• Temperature of fluids: up to 100 °C
• Maximum differential pressure: 4 bar
• Couplings (DIN 11851, Garolla, BSP, Macon, Triclover, SMS, BSM/RJT).
• Pump body: stainless steel AISI 304/316
• Reversible mechanical seal (Stainless steel-Graphite-NBR, Tungsten carbide-NBR, Tungsten carbide-Viton, ecc.).

IMPELLER FEATURES

• Natural rubber (NR) – Excellent for water based liquid at room temperature, highest mechanical resistance.
• Neoprene (CR) – Good balance between chemical and mechanical resistance.
• Nitrile (NBR) – Excellent resistance to oils and fats.
• EPDM – Best for hot fluid and CIP cleaning. Excellent for acid and alkaline fluids.
• Silicon (VMQ) – Best for high temperature but low mechanical resistance.

AVAILABLE MODELS (For details please check the Technical catalogue out)

• SP – Bare shaft pumps
• MID – Hydraulic orbital motor pumps
• EP – Coaxial pumps
• GR – Belt driven pumps on base or trolley
• RID – Pumps with gearmotor
• VA – INV – Pumps with mechanical speed variator or frequency converter
• INV BS – Monoblock pumps with frequency converter and controls on main panel
• MINIVERTER – Monoblock pumps with integrated frequency converter

About the manufacturer

Born during the ‘50s, Liverani manufactures and exports its pumps and presses all over the world. All its products are produced according to CE standards and the high quality of raw materials and technology allow excellent performances together with a simple use and maintainance of the pumps. The wide range of products, the materials and the numerous pump versions allow a very wide range of applications.

L'articolo Stainless steel self-priming pumps with flexible impeller proviene da FORTEK.

Designed to meet USDA (United States Department of Agriculture – Dairy Division) standards, these pumps are the ultimate in leak protection and clean pumping with the paired performance of AODD technology.  Whether in a clean-in-place or clean-out-of-place application, these pumps will exceed the need for reliability and cleanability.  Some of their most exceptional features include:

• Leak Detection
  Pair with Electronic Leak Detection for full USDA compliance.
• Materials Of Construction
  Electropolished 316 and 302/304 Stainless Steel components.
• Porting Options
  Rotatable manifolds, and top or bottom discharge available.

They are ideal for liquids with medium or high viscosity and a solid step up to 27.4 mm. All models have certified elastomers for food uses.

• Models available: from 1″ to 2″1/2
• Flow rates: from 204 l/min to 570 l/min

L'articolo SandPiper – USDA proviene da FORTEK.

The SandPiper FDA (Food & Drug Administration) pumps are available in 1″ through 3″ ball check valve designs and a 2″ (line size solids handling) flap check valve design. Variable flow capacities across the range are 0–235 gallons per minute.

These special duty pumps are constructed of FDA compliant material components of Stainless Steel (wetted castings) and a selection of FDA Santoprene, FDA Nitrile and PTFE diaphragms, check valves and valve seats. Standard non-wetted components are white epoxy coated Aluminum with stainless steel hardware. 1″, 1½” and 2″ pumps are offered with sanitary clamp fittings and 3″ pumps are offered with an ANSI flange.

• Materials Of Construction
  Electropolished 316 and 302/304 Stainless Steel components.
• Porting Options
  Rotatable manifolds, and top or bottom discharge available.

L'articolo SandPiper – FDA proviene da FORTEK.